I forgot to post the picture of my install. http://www.djhsolutions.com/images/IMG00049.jpg
Front panel is from Wim @ http://www.kd85.com Darrick Darrick Hartman wrote: > Pete, > > The PCI bus doesn't require more amperage (not voltage). The additional > power is supplied via a molex connector on the back of the card. > > You CAN take up to 1 amp off the JP15 connector. This should allow you > to power up to 2 fxs channels without problem. > > http://wiki.soekris.info/5501_Interfaces > > Here's a picture of one of my installations with all FXO modules. Note > that no additional power is required (because these are all FXO modules). > > Darrick > > > Pete Kay wrote: >> Hi, >> >> How do you solve the external power source problem? Did you have to >> rewire the PCI board differently to increase the Voltage? >> >> Thanks, >> Pete >> >> On Sat, Feb 21, 2009 at 11:32 AM, Darrick Hartman >> <[email protected]> wrote: >>> I have several net 5501's with Rhino 8 and 24 port boards but max of 12 >>> channels. No problems with the load. >>> FXS may require an external power source. > > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
