Hi, How do you solve the external power source problem? Did you have to rewire the PCI board differently to increase the Voltage?
Thanks, Pete On Sat, Feb 21, 2009 at 11:32 AM, Darrick Hartman <[email protected]> wrote: > I have several net 5501's with Rhino 8 and 24 port boards but max of 12 > channels. No problems with the load. > FXS may require an external power source. > > Darrick > ------Original Message------ > From: Steve Holdoway > Sender: [email protected] > To: [email protected] > Subject: Re: [Soekris] questions about using soekris for PBX > Sent: Feb 20, 2009 8:19 PM > > On Sat, 21 Feb 2009 09:54:24 +0800 > Pete Kay <[email protected]> wrote: > >> Hi, >> >> If I use soekris boards to build a PBX and I want to support 4 4-port >> fxo/fso PCI card. Is it possible? >> >> What is the maximum number of card that can be supported? >> >> Thanks, >> Pete >> _______________________________________________ >> Soekris-tech mailing list >> [email protected] >> http://lists.soekris.com/mailman/listinfo/soekris-tech > One 3.3V PCI card is possible... I'm trying to get one working with a digium > tdm-400 ( because I've got one ). The 410 is supposed to be better ). Note > that if you're using FXO extensions, you'll need to supply 12V to the card to > ring the extensions. > > But that'll inly get you 4 ports. There are 8 and 24 port versions available, > bit you may be asking for trouble with performance... > > Steve > -- > Steve Holdoway <[email protected]> > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > > > Sent from my BlackBerry(R) wireless device from U.S. Cellular > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
