Hello Peiter, I am glad to hear this . But not all sparcs
are the same the sparc elc/elx and the rest of the sun4 ilk
didn't have the lowend ability to get above 38400 . But now
that I've finally gotten my hads on a Sparc20 , I'll check the
uart specs & see what it is capable of . Tnx, JimL
On Wed, 14 Jul 1999, Pieter Krul wrote:
> Shawn Boyette wrote:
> > Mr. James W. Laferriere writes:
> > > Hello Jakub, Last I knew most (if not all) terminal/comm.
> > > packages don't know how to use the higher baudrates yet .
> > > Has this changed ? IIRC pppd/chat is just one of the
> > > culprits ? Tia, JimL
> > So that's what the problem was! I got a Sparc LX over the weekend and
> > was going to use it as a IP masquerading box and web/mail/irc server
> > but the transfer rate always stayed around 300-400bps. The box has a
> > stock (but minimal) Debian 2.1 install on it.
> As far I have seen so far on my Ultra5, there is no problem with
> pppd 2.3.5 / chat from pppd 2.3.7 / kernel 2.2.10:
> xenon chat[1016]: ATJH0B40D8800806^M^M
> xenon chat[1016]: CONNECT
> xenon chat[1016]: -- got it
> xenon chat[1016]: send (^M)
> xenon pppd[1015]: Serial connection established.
> xenon chat[1016]: expect ( 460800)
> xenon chat[1016]: 460800
> xenon chat[1016]: -- got it
> xenon chat[1016]: send (^M)
> xenon pppd[1015]: Using interface ppp0
> xenon pppd[1015]: Connect: ppp0 <--> /dev/ttyS1
> xenon pppd[1015]: Remote message:
> xenon pppd[1015]: local IP address 194.159.230.209
> xenon pppd[1015]: remote IP address 194.159.73.222
>
> With STAC compression on a dialup 64kb ISDN line when ftp-ing from a
> site in the UK to NL:
>
> 150 Opening BINARY mode data connection for regularfile (102400 bytes).
> 226 Transfer complete.
> 102400 bytes received in 2.44 secs (41 Kbytes/sec)
>
> The only thing that probably stays bored is the SAB82532 inside the
> Ultra5.
>
> Regards,
>
> Pieter
+-----------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 25416 22nd So | Give me Linux |
| [EMAIL PROTECTED] | DesMoines WA 98198 | only on AXP |
+-----------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]
