Dear Jürgen,
Thank you for the reply. Apologies for any confusion my email may have introduce but I am configuring the model as per the physical IP (Naturally the model is configured as per the Physical IP.) Checking the menu you are mentioning below I see the WAN IP mentioned under the redundancy preferred addresses but neither one of the physical IP (X.X.X.65) and an HSRP IP(X.X.X.67) are there. Do you think I removed the above WAN IP and added the HSRP IP instead the alarms would not show anymore? Best Regards, Georges Touma From: Warich, Juergen [mailto:[email protected]] Sent: Monday, January 26, 2009 1:29 PM To: Georges Touma; spectrum Subject: AW: [spectrum] network address differs from the Primary Address Hi Georges, it maybe just a typo, but reading your mail you are writing that you have modeled the router with the HSRP address. Ensure that the device is modeled with their "pysical" not "logical" interfaces. Open the information tab of the device and search for the menu redundancy. In the following window, you can decide what IP should be checked as well, in case the primary IP is not reachable anymore. Regards, Jürgen _____ Von: Georges Touma [mailto:[email protected]] Gesendet: Sonntag, 25. Januar 2009 06:52 An: spectrum Betreff: RE: [spectrum] network address differs from the Primary Address Hello Pablo, Thank you for the reply. We are using Spectrum version 8.1 SP2. Can you please elaborate on the manual manipulation you are mentioning? Any idea what can be done in 8.1 to prevent these alarms from occurring? Best Regards, Georges Touma From: Pablo Vicencio [mailto:[email protected]] Sent: Wednesday, January 21, 2009 4:12 PM To: spectrum Subject: RE: [spectrum] network address differs from the Primary Address What is your Spectrum Version?, In Spectrum 90 is possible the manual manipulation of this address. Best Regards, Pablo Vicencio Diaz. -----Mensaje original----- De: Georges Touma [mailto:[email protected]] Enviado el: mié 21/01/2009 9:53 Para: spectrum Asunto: [spectrum] network address differs from the Primary Address Hello Gurus, We are using spectrum to monitor and manage cisco routers. Once every while we get the below alarm on some of the routers. The alarms seem to get generated without any apparent cause. Device model ( name - Router-a, type - Rtr_Cisco ) has a network address ( X.X.X.65 ) that differs from the Primary Address ( X.X.X.67 ). The CHECK_GEN_ALARMS attribute for this model is "true". The router in question has a physical IP (X.X.X.65) and an HSRP IP(X.X.X.67 ) configured. Naturally the model is configured as per the Physical IP. Any ideas why the alarm is getting created and how to resolve this? Best Regards, --- Georges Touma System and Network Specialist NavLink |: <http://www.navlink.com/> http://www.navlink.com |* <mailto:[email protected]> [email protected] |( +966 1 4522647 |( +966 50 3310725 --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
