Hi, If you want an alarm when error or discard packets exceed 1%, you have to set 1000000 in attribute editor. Alternatively, you can set those thresholds in the Detail Pannel -> Information tab -> Thresholds and Watches -> Thresholds. In this case 1% is entered as "1,0".
Generally speaking, you only need to monitor "Total Errors". You don't need to monitor In and Out because your device will never throw out a packet with errors so all errors will be "In Errors". But in case you still need to monitor in and out values, you need to create a Watch. Again in Detail Pannel -> Information tab -> Thresholds and Watches -> Watches. I recommend you to read Spectrum_Watches_User_ENU.pdf user guide. In the watch you'll be able to use %Errors / %Discards or Total Errors / Discards or Increment (Delta) Errors / Discards either for In and Out. Delta_Errors_In (0x22009f), Delta_Errors_Out (0x2200a0), Percent_IN_Errors (0x220025), Percent_OUT_Errors (0x220029), Sum_IN_Errors (0x220030), Sum_OUT_Errors (0x220034) (You can filter in the Attribute Tab for a port model type in order to search all IDs). I hope this can be helpful. Regards. James. On Wed, Mar 23, 2011 at 7:38 AM, Rajani_Bayapati < [email protected]> wrote: > Hi List, > > > > we would like to set the following attributes for our network > devices(routers, firewalls etc..) > > > > Interface Errors - Incoming > > 10min > > Major > > >1% > > Interface Errors - Outgoing > > 10min > > Major > > >1% > > Interface Discards - Incoming > > 10min > > Major > > >1% > > Interface Discards - Outgoing > > 10min > > Major > > >1% > > > > In Attribute Editor there are a folder with those attributes > > (Thresholds-->Interfaces Thresholds) but as I've said, I cannot find > those > > IDs > > > > Someone knows which are those attribute IDs?? > > > > % Errors Thresholds > > % Errors Reset > > % Errors thresholds violation duration > > % Discarted Thresholds > > % Discarted Reset > > % Discarted thresholds violation duration > > Have not found these attributes in > $SPECROOT/PolicyMgmt/Spectrum/policy-settings-spectrum.xml also? > > > > If we keep 1 % for these attributes(showing in micro percent)in attribute > editor , getting lot of alarms for all interfaces (PERCENT DISCARDS > THRESHOLD EXCEEDED—MINOR) of one of our firewall. > > > > *Sample Alarm for one interface of our firewall :* > > > > Alarm Notification from Mahindra Satyam Monitoring System > > > > Alarm SET: > > > > Date: 03/16/2011 > > Time: 16:24:16 IST > > Node Name: > > AlarmID: 32130514 > > IPAddress: > > > > > > EventMessage: Wed 16 Mar, 2011 - 16:24:16 - Threshold Exceeded for > PERCENT DISCARDS for an unacceptable duration. The threshold value is > 0.000001 %, and the current value is 79.150579 %. Model Type = Gen_IF_Port, > (event [0x0001133a]) > > > How spectrum can calculates these attributes ? Could you please help. > > > > > > > > Thank you > > Regards > > Rajani Boyapati ? > > Support Engineer *| CA eHealth & CA Spectrum* > [email protected] > <[email protected]>[image: > cid:[email protected]] > > [image: gr] > > [image: cid:[email protected]]* Save our Planet.* > > > > *_________________________* > > > > > > ------------------------------ > > DISCLAIMER: > This email (including any attachments) is intended for the sole use of the > intended recipient/s and may contain material that is CONFIDENTIAL AND > PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or > distribution or forwarding of any or all of the contents in this message is > STRICTLY PROHIBITED. If you are not the intended recipient, please contact > the sender by email and delete all copies; your cooperation in this regard > is appreciated. > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
<<image001.jpg>>
<<image004.jpg>>
<<image003.jpg>>
