Hi, Right, for 1% you have to set 1000000 in Attribute Editor. The reset value can also be set to 1% (1000000) if you want. The benefit of using a lower value for reset is that if interface has aprox 1% packets discards the alarm will be flapping. So, it's OK to set 1% for set and reset. But probably I would use 1% for set and 0% for reset.
Regards. James. On Mon, Apr 18, 2011 at 11:06 AM, boyapati rajani <[email protected]> wrote: > HI james, > > > > In spectrum console errors and discards % showing in micro percent in > attribute editor, If we want an alarm when error or discard packets exceed > 1%, we have to set 1000000 in attribute editor right? what would be the > reset value if we would like to keep 1% (i.e. 1000000) for firewalls and > router interfaces. > > > > > > > > Thank you > > Regards > > Rajani Boyapati > > Support Engineer | CA eHealth & CA Spectrum > Mahindrasatyam computer services Ltd. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
