Hi Stephen,
I must confess that it took me a couple moments to realise the meaning of "RTFM" but after that my mood changed for good. I think that in this particular case (considering who was the original sender) you were entitled to your answer 100% - his questions more than often are very simple. Some trial and error or reading the manual would have solved the problem. Well, a solution could be to ignore such questions if they come from the same user. Coming from others - well - give them the help they need ... till proved otherwise. OK - hope your mood changed with our replies J Regards, Eugen NAIMAN From: Stephen Warne [mailto:[email protected]] Sent: Thursday, 7 July 2011 8:41 PM To: spectrum Subject: RE:[spectrum] change threshold setting for interfaces Hi Subhash/All I think I must be in a grumpy mood this morning but is it just me or are there more questions being posted lately where a response of RTFM might be appropriate? Anyway to answer your question - if there are a number of interfaces you need to change or want to set a default value use the locator search to find the relevant interfaces and then use the attribute editor to set the thresholds. Regards Stephen. From: CATools Helpdesk [mailto:[email protected]] Sent: 07 July 2011 08:21 To: spectrum Subject: [spectrum] change threshold setting for interfaces Hi All, We are getting below mention alerts from spectrum for interfaces, we want to change threshold setting, can anyone help me to resolved? Error threshold exceeded for the interface Se0/0/1 on -- device Threshold value10, current value 10. Error threshold exceeded for the interface Se0/0/0 on -- device Threshold value10, current value 10. Thanks & Regards, Subhash Mahakal Phone: 020-40122067 Please do not print this email unless it is absolutely necessary. Use less paper - Save Tree - make "IT" a "Greener" Tomorrow. - Disclaimer-- This email and any files transmitted with it are confidential and may be privileged or otherwise protected from disclosure and are intended solely for the use of the entity / individual to whom they are addressed. If you have received this email in error or If you are not the intended recipient, please notify the sender immediately by way of telephone or email and delete this message and any files transmitted from your system. Please note that any views presented in the email are solely those of the author and do not necessarily represent those of the organization. While all care has been taken to avoid viruses the recipient is advised to check this email and attachments for presence of viruses. The organization accepts no liability on this account. * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission. If the transmission contains advice, the advice is based on instructions in relation to, and is provided to the addressee in connection with, the matter mentioned above. Responsibility is not accepted for reliance upon it by any other person or for any other purpose. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
