Hi Omar, I think that behaviour is related to the way some watches are evaluated and I suspect all these are evaluated either on “change” or “on demand” (most probably “on change” in this case). Since there is no change, the watch will remain in the initial state until a change occurs, then it will go into “active” state.
It might not be a bug at all but working as intended. My advice: leave them as they are – once the change occurs they will do their job. Regards, ============================================ Eugen NAIMAN IT Officer ICT Infrastructure Department Health and Human Services 5/99 Bathurst Street, Hobart, 7000 •: (03) 6233 8565 Ê: (03) 6233 6297 [email protected]<mailto:[email protected]> ============================================ From: Omar Izetbegovic [mailto:[email protected]] Sent: Tuesday, 3 July 2012 6:37 AM To: spectrum Subject: [spectrum] Watch stuck in initial state Hi everyone, my customer has got Spectrum 9.2.1.7.38 installed on 3 Windows 2003 servers. Those servers are 3 Spectrum components: SpectroServer, OneClick and BOXI. They are having problems with watches they created. They are using lots of watches to monitor specific devices as UPS devices and Huawei switches. They have created watches some time ago and they were in Active state after creation. The problem occurs when Spectroserver is restarted. After restart, lots of watches get into Initial state and stay that way. At the same time the rest of the watches get into Active state like they should (they were also in Active state before SS restart). When Initial watches are stopped/started, they get into Active state. Do you know what could be the reason watches get stuck in Initial state and how could I quickly get them into Active state? Srdačan pozdrav / Kind regards, ___________________ Omar Izetbegović Sedam IT d.o.o. HR - 10 000 Zagreb Koledovčina 2 Tel: +385 1 2353 738 Fax: +385 1 2353 707 Mob: +385 91 2353 738 www.sedamIT.hr ___________________ Napomena: Ova poruka sadrzi podatke povjerljive prirode, iskljucivo namijenjene osobama oznacenima kao primateljima te se pristup od strane bilo koje druge osobe smatra neovlastenim. Ukoliko niste oznaceni primatelj, svaka distribucija, kopiranje, umnozavanje ili otkrivanje sadrzaja trecim osobama je strogo zabranjeno i smatra se protuzakonitim. Ukoliko ste dobili ovu poruku, a niste oznaceni primatelj, molimo Vas da sto prije obavijestite posiljatelja poruke i unistite sve postojece kopije. Ova napomena takodjer potvrdjuje da je ova elektronicka poruka testirana na postojanje racunalnih virusa. Disclaimer: The information in this email is confidential and it is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any distribution, copying, duplication or disclosure is prohibited and may be unlawful. If you have received this email in error, please notify the sender immediately and destroy it, and all copies of it. This footnote also confirms that this email message has been swept for the presence of computer viruses. * --To unsubscribe from spectrum, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe spectrum [email protected]<mailto:[email protected]> ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
