Could it be a policy in effect?

Altug Gur

Lähetetty iPhonistani


On 3.7.2012, at 9.31 ap., Omar Izetbegovic <[email protected]>
wrote:

Hi Eugen,

unfortunately you are wrong - watches are determined by polling. And
polling period is max 10 minutes. So there must be something else that is
keeping them in Initial state and I must figure out what.

Srdačan pozdrav / Kind regards,
___________________
Omar Izetbegović
Sedam IT d.o.o.
HR - 10 000 Zagreb
Koledovčina 2
Tel: +385 1 2353 738
Fax: +385 1 2353 707
Mob: +385 91 2353 738
www.sedamIT.hr
___________________



From:        "Naiman, Eugen (DHHS)" <[email protected]>
To:        Omar Izetbegovic <[email protected]>, spectrum <
[email protected]>,
Date:        03.07.2012 01:05
Subject:        RE: [spectrum] Watch stuck in initial state
------------------------------



Hi Omar,

I think that behaviour is related to the way some watches are evaluated and
I suspect all these are evaluated either on “change” or “on demand” (most
probably “on change” in this case).
Since there is no change, the watch will remain in the initial state until
a change occurs, then it will go into “active” state.

It might not be a bug at all but working as intended.

My advice: leave them as they are – once the change occurs they will do
their job.

Regards,
*============================================*
*Eugen NAIMAN*
IT Officer
ICT Infrastructure
Department Health and Human Services
5/99 Bathurst Street, Hobart, 7000
(:  (03) 6233 8565
 Ê:  (03) 6233 6297 *
**[email protected]* <[email protected]>*
============================================*

*From:* Omar Izetbegovic
[mailto:[email protected]<[email protected]>]
*
Sent:* Tuesday, 3 July 2012 6:37 AM*
To:* spectrum*
Subject:* [spectrum] Watch stuck in initial state

Hi everyone,

my customer has got Spectrum 9.2.1.7.38 installed on 3 Windows 2003
servers. Those servers are 3 Spectrum components: SpectroServer, OneClick
and BOXI. They are having problems with watches they created.

They are using lots of watches to monitor specific devices as UPS devices
and Huawei switches. They have created watches some time ago and they were
in Active state after creation. The problem occurs when Spectroserver is
restarted. After restart, lots of watches get into Initial state and stay
that way. At the same time the rest of the watches get into Active state
like they should (they were also in Active state before SS restart). When
Initial watches are stopped/started, they get into Active state.

Do you know what could be the reason watches get stuck in Initial state and
how could I quickly get them into Active state?

Srdačan pozdrav / Kind regards,
___________________
Omar Izetbegović
Sedam IT d.o.o.
HR - 10 000 Zagreb
Koledovčina 2
Tel: +385 1 2353 738
Fax: +385 1 2353 707
Mob: +385 91 2353 738*
**www.sedamIT.hr* <www.sedamIT.hr>
___________________


Napomena: Ova poruka sadrzi podatke povjerljive prirode, iskljucivo
namijenjene osobama oznacenima kao primateljima te se pristup od strane
bilo koje druge osobe smatra neovlastenim. Ukoliko niste oznaceni
primatelj, svaka distribucija, kopiranje, umnozavanje ili otkrivanje
sadrzaja trecim osobama je strogo zabranjeno i smatra se protuzakonitim.
Ukoliko ste dobili ovu poruku, a niste oznaceni primatelj, molimo Vas da
sto prije obavijestite posiljatelja poruke i unistite sve postojece kopije.
Ova napomena takodjer potvrdjuje da je ova elektronicka poruka testirana na
postojanje racunalnih virusa.

Disclaimer: The information in this email is confidential and it is
intended solely for the addressee. Access to this email by anyone else is
unauthorized. If you are not the intended recipient, any distribution,
copying, duplication or disclosure is prohibited and may be unlawful. If
you have received this email in error, please notify the sender immediately
and destroy it, and all copies of it. This footnote also confirms that this
email message has been swept for the presence of computer viruses.

   - --To unsubscribe from spectrum, send email to
*[email protected]*<[email protected]>with the body: unsubscribe
spectrum
   *[email protected]* <[email protected]>


 ------------------------------

CONFIDENTIALITY NOTICE AND DISCLAIMER
The information in this transmission may be confidential and/or protected
by legal professional privilege, and is intended only for the person or
persons to whom it is addressed. If you are not such a person, you are
warned that any disclosure, copying or dissemination of the information is
unauthorised. If you have received the transmission in error, please
immediately contact this office by telephone, fax or email, to inform us of
the error and to enable arrangements to be made for the destruction of the
transmission, or its return at our cost. No liability is accepted for any
unauthorised use of the information contained in this transmission.


Napomena: Ova poruka sadrzi podatke povjerljive prirode, iskljucivo
namijenjene osobama oznacenima kao primateljima te se pristup od strane
bilo koje druge osobe smatra neovlastenim. Ukoliko niste oznaceni
primatelj, svaka distribucija, kopiranje, umnozavanje ili otkrivanje
sadrzaja trecim osobama je strogo zabranjeno i smatra se protuzakonitim.
Ukoliko ste dobili ovu poruku, a niste oznaceni primatelj, molimo Vas da
sto prije obavijestite posiljatelja poruke i unistite sve postojece kopije.
Ova napomena takodjer potvrdjuje da je ova elektronicka poruka testirana na
postojanje racunalnih virusa.

Disclaimer: The information in this email is confidential and it is
intended solely for the addressee. Access to this email by anyone else is
unauthorized. If you are not the intended recipient, any distribution,
copying, duplication or disclosure is prohibited and may be unlawful. If
you have received this email in error, please notify the sender immediately
and destroy it, and all copies of it. This footnote also confirms that this
email message has been swept for the presence of computer viruses.

   - --To unsubscribe from spectrum, send email to [email protected] with
   the body: unsubscribe spectrum [email protected]

---
To unsubscribe from spectrum, send email to [email protected] with the body: 
unsubscribe spectrum [email protected]

Reply via email to