Hi, can anyone help me? I've checked and rechecked, and I can't get my brand new speedtouch 330 to work with mnf 8.2 (Mandrake's 8.2 based firewall). Here's what I did: I've downloaded the src rpm for the 1.2.1 drivers, rebuilt it on a mandrake 8.2 development machine, and installed it on my mnf. Then, I got the mgmt.o file from alcatel's drivers, copyed it to /usr/share/speedtouch. Step three, I configured the adsl connection on the web interface - this created the /etc/ppp/peers/adsl file, etc. I've checked, and it is correctly filled up. Next, I verified pap-secrets and chap-secrets, and the login ids and passwords checked. Why is it then that I can't connect (when I can connect if I use w2k), and when I enable debug for ppp I get what follows on the syslog:
Feb 21 21:24:08 fwall kernel: usb_control/bulk_msg: timeout Feb 21 21:24:08 fwall kernel: usbdevfs: USBDEVFS_BULK failed dev 5 ep 0x85 len 512 ret -110 Feb 21 21:24:33 fwall modem_run[20523]: ADSL synchronization has been obtained Feb 21 21:24:33 fwall modem_run[20523]: ADSL line is up (512 kbit/s down | 128 kbit/s up) Feb 21 21:24:34 fwall kernel: HDLC line discipline: version $Revision: 3.3 $, maxframe=4096 Feb 21 21:24:34 fwall kernel: N_HDLC line discipline registered. Feb 21 21:24:34 fwall pppd[20560]: pppd 2.4.1 started by root, uid 0 Feb 21 21:24:34 fwall pppd[20560]: using channel 73 Feb 21 21:24:34 fwall pppoa3[20563]: pppoa3 version 1.2-beta1 started by root (uid 0) Feb 21 21:24:34 fwall pppd[20560]: Using interface ppp0 Feb 21 21:24:34 fwall pppd[20560]: Connect: ppp0 <--> /dev/pts/2 Feb 21 21:24:34 fwall pppoa3[20563]: Control thread ready Feb 21 21:24:34 fwall pppoa3[20568]: host --> pppoa3 --> modem stream ready Feb 21 21:24:34 fwall pppoa3[20569]: modem --> pppoa3 --> host stream ready Feb 21 21:24:35 fwall pppd[20560]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9a1983e3>] Feb 21 21:24:35 fwall kernel: ppp_synctty: send buffer, count = 20 Feb 21 21:24:35 fwall kernel: FF 03 C0 21 01 01 00 10 ...!.... Feb 21 21:24:35 fwall kernel: 02 06 00 00 00 00 05 06 ........ Feb 21 21:24:35 fwall kernel: 9A 19 83 E3 .... Feb 21 21:24:38 fwall pppd[20560]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9a1983e3>] Feb 21 21:24:38 fwall kernel: ppp_synctty: send buffer, count = 20 Feb 21 21:24:38 fwall kernel: FF 03 C0 21 01 01 00 10 ...!.... Feb 21 21:24:38 fwall kernel: 02 06 00 00 00 00 05 06 ........ Feb 21 21:24:38 fwall kernel: 9A 19 83 E3 .... Feb 21 21:24:41 fwall pppd[20560]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9a1983e3>] Feb 21 21:24:41 fwall kernel: ppp_synctty: send buffer, count = 20 Feb 21 21:24:41 fwall kernel: FF 03 C0 21 01 01 00 10 ...!.... Feb 21 21:24:41 fwall kernel: 02 06 00 00 00 00 05 06 ........ Feb 21 21:24:41 fwall kernel: 9A 19 83 E3 [...] Feb 21 21:25:05 fwall pppd[20560]: LCP: timeout sending Config-Requests Feb 21 21:25:05 fwall pppd[20560]: Connection terminated. Feb 21 21:25:05 fwall pppoa3[20568]: Error reading from source device Feb 21 21:25:05 fwall pppoa3[20563]: Woken by a sem_post event -> Exiting Feb 21 21:25:05 fwall pppoa3[20563]: Write to usb Canceled Feb 21 21:25:05 fwall pppoa3[20563]: Exiting Feb 21 21:25:05 fwall pppd[20560]: using channel 74 Feb 21 21:25:05 fwall pppd[20560]: Using interface ppp0 Feb 21 21:25:05 fwall pppd[20560]: Connect: ppp0 <--> /dev/pts/3 Feb 21 21:25:05 fwall pppd[20560]: Script /usr/bin/pppoa3 -vpi 8 -vci 38 -e 1 finished (pid 20563), status = 0xff00 Feb 21 21:25:05 fwall pppoa3[20709]: pppoa3 version 1.2-beta1 started by root (uid 0) Feb 21 21:25:05 fwall pppoa3[20709]: Control thread ready Feb 21 21:25:05 fwall pppoa3[20712]: host --> pppoa3 --> modem stream ready Feb 21 21:25:05 fwall pppoa3[20713]: modem --> pppoa3 --> host stream ready Feb 21 21:25:06 fwall pppd[20560]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xd42ded7c>] Feb 21 21:25:06 fwall kernel: ppp_synctty: send buffer, count = 20 Feb 21 21:25:06 fwall kernel: FF 03 C0 21 01 02 00 10 ...!.... Feb 21 21:25:06 fwall kernel: 02 06 00 00 00 00 05 06 ........ Feb 21 21:25:06 fwall kernel: D4 2D ED 7C .-.| Feb 21 21:25:09 fwall pppd[20560]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xd42ded7c>] Feb 21 21:25:09 fwall kernel: ppp_synctty: send buffer, count = 20 Feb 21 21:25:09 fwall kernel: FF 03 C0 21 01 02 00 10 ...!.... Feb 21 21:25:09 fwall kernel: 02 06 00 00 00 00 05 06 ........ Feb 21 21:25:09 fwall kernel: D4 2D ED 7C .-.| Feb 21 21:25:12 fwall pppd[20560]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xd42ded7c>] Feb 21 21:25:12 fwall kernel: ppp_synctty: send buffer, count = 20 Feb 21 21:25:12 fwall kernel: FF 03 C0 21 01 02 00 10 ...!.... Feb 21 21:25:12 fwall kernel: 02 06 00 00 00 00 05 06 ........ Feb 21 21:25:12 fwall kernel: D4 2D ED 7C .-.| Any help would be welcome... I think it might be related to the values for vci and vpi, anyone knows which should be used for ONI Portugal, or where can I find them on the windows drivers? Thank you. -- José Bernardo B. R. Silva [EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
