----- Original Message ----- From: "eric tanguy" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, May 16, 2004 12:38 AM Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
> > > This may be a power issue on USB? > > Could you try without any other hungry other device pluged in you usb > > bus? (or in the other controller because you have one ehci-hcd and one > > usb-ohci) > Ok you are right!! It seems that only 2 over 6 usb ports are self powered > under linux (this is not the same on windows because my modem works fine > connected to all differents ports). It's not a problem because i just have > a modem and a mini HD which need powered by usb but i would like to know > why ... > Now i have : P: Vendor=06b9 ProdID=4061 Rev= 4.00 > Which firmware i need and where to find it ? > How configure and test my connection because i tried and it didn't work. > Eric > You need the zzzlp(x) serie with Rev 4.00 modem_run -v 1 -t 90 -n 4 -f /usr/share/speedtouch/firmware.ZZZLP1.eni -a /usr/share/speedtouch/boot.ZZZLP2.eni -v 1 display nice informations -n 4 is enough attempt to load firmware -t 90 avoid to wait to much if you ADSL is brocken, you reboot and your connection start automaticaly at boot. If you use the kernel driver, you need to : - modprobe speedtch - run modem_run with adding -k to other options - sleep 5 I am not usin hotplug, so I don't know to much how it should work. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
