Hi Duncan, The problem got resolved.As you suggested I disabled adummy in the kernel and in addition enabled Lan Emulation Support.Then I configured nas0 with the following command:
#br2684ctl -b -c 0 -a 8.35 && #ifconfig nas0 10.200.3.190 netmask 255.255.0.0 #route add default gw 10.200.1.1 I thank you and Gilles for the suggestions that helped me resolve the problem. The discussions with you two were indeed a learning experience for me. Tommy -----Original Message----- From: [EMAIL PROTECTED] on behalf of Duncan Sands Sent: Tue 9/11/2007 2:25 PM To: speedtouch@ml.free.fr Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway Hi Tomy, I think the problem is that the packets are going to the adummy driver. Here you can see that interface 0 is adummy: > Itf Type ESI/"MAC"addr AAL(TX,err,RX,err,drop) ... [refcnt] > > 0 adummy 000000000000 0 ( 0 0 0 0 0 ) 5 ( 3988 0 0 0 0 ) [4] > > 1 speedtch0090d04e4916 0 ( 0 0 0 0 0 ) 5 ( 0 0 0 0 0 ) [1] And here you can see that 8.35 is going to interface 0: > Itf VPI VCI AAL RX(PCR,Class) TX(PCR,Class) > > 0 8 35 5 0 UBR 0 UBR CLIP, Itf:atm0, Encap:None > > 0 0 5 5 0 UBR 0 UBR > > 0 0 16 5 0 UBR 0 UBR I notice from dmesg that adummy appears early: > netconsole: not configured, aborting > adummy: version 1.0 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 so I'm guessing you have it compiled in. I suggest you don't bothering compiling it at all. Ciao, Duncan. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] -- Binary/unsupported file stripped by Listar -- -- Type: application/ms-tnef -- File: winmail.dat Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]