If I detect body filler on a car, I will make sure I remove it all down to bare metal. The reason is that I don't know what that filler is hiding. Was it done as a filler or to cover over a problem? How thick is it? Is it a problem?
Ideally, you should remove all body filler and see what lay underneath. You should then start metalworking to remove as much of the dent/damage as possible. Body filler should only be used for that small amount you can't otherwise fix without replacing the panel. Anything more than 1/4" deep is asking for trouble and an indication you need to spend more time on the metalwork to bring it closer to the original shape. Surface weld stud guns are ideal for this sort of work to help pull dents out. -Vegaman Dan -1968 Spitfire Mk II "Giles" Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
