In-line response
On Tue, Feb 25, 2020 at 10:16 AM Pablo Camarillo (pcamaril) < pcama...@cisco.com> wrote: > Gyan, > > > > As I (and other WG members) have explained in the past, PSP is not trying > to provide any feature parity with MPLS. > > > > It enables new use-cases that have been provided by other members in the > list. [1], [2] and [5]. > > From operational perspective it is not complex as explained in [3]. > > There is substantial benefit. Four operators have deployed PSP, which > proves the benefit. > > And additionally operators have expressed their value in [4] and [5]. > > > > [1].- > https://mailarchive.ietf.org/arch/msg/spring/wTLJQkzC6xwSNPbhB84VH0mLXx0 > (1) reduce the load of final destination. This benefit can be notable for the following sub reasons. I know you say you are not trying to create any feature parity with MPLS however by using PSP is similar to PHP in that you are trying to offload processing on the end X node in which could be any node in the path and not just the PHP node. With SRv6 the loophole created here is that at each hop along the traffic engineered path, the SID in the SL is popped and copied to the DA hop by hop - so each hop being a single hop End X SID instantiation, the PSP function of SRH removal can now occur at any node along the path and not just the MPLS style one hop prior to ultimate hop egress PE node. So PSP is being leveraged to be used at any end X and not just the final destination. This makes the situation worse for RFC 8200 violations. What would be the use case where you would need to pop the SRH early at an End X node that is not the final destination. The SL has to be 0 to pop the SRH. Please correct me then if the PSP function can only occur at the final destination one hop prior PHP node. (1.1) final destination tends to have heavy load. It need to handle all the EHs and do the delivery/demultiplex the packet to the right overlay service. Does the egress PE really have a heavy load with modern hardware. How is the PSP function with modern hardware any more difficult popping the SRH on the final destination node then with MPLS explicit null UHP. Other then the 6in6 topmost SRv6 encapsulation that is popped at the final destination which is different then MPLS 4 byte shim topmost, with the bottom stack labels being identical in both scenarios, is there really extra load on the final destination egress PE that is being saved?? (1.2) example 1, the final destination may need to handle the DOH after the RH. DOH would be set in the encapsulated packet in the customer payload that is tunneled 6in6 over the provider network. Doubtful that DOH would be set in the SP SRv6 closed domain (1.3) example 2, the final destination may need to do the assembly of fragmented packets. In general almost across the board all providers set their MTU to 9216 jumbo so as to not have outer 6in6 SRv6 header fragmentation issues (1.4) example 3, the final destination may need to do AH/ESP after the Fragmentation Header. Just like 1.2 AH/ESP would be part of the customer payload encapsulated (1.5) example 4, the final destination may need to deliver the packet to the right overlay service. In the SP network the packet is still forwarded hop by hop along the SRH traffic engineered path to the prefix SID fec destination, which is always the final destination in the SL, when SL is 0 the USP USD deencapsulation occurs. So in my mind the overlay service would not ever be on an end DT transit node P router and would always sit on an egress PE router. Am I missing something? (2) support the incremental deployment when final destination(s) do not process/recognize SRH. This benefit can be notable for the following sub reasons. This is during interim migration, however I believe the best practice for SRv6 brown field is to have the PEs SRv6 capable and the Ps IPv6 capable for End DT x transit node forwarding only - which P routers should adhere strictly to RFC 8200 and should never have to perform or technically even have to perform the PSP function. In most SP networks the PEs are protocol and feature rich and have the latest code and hardware where the P routers “BGP free” “pim free” core - only perform label swapping in MPLS world and SR world only label stacking. (2.1) A core router may (fan-out) connected with a big number of low-end routers that do not support SRH but support tunnel-end/service-demultiplex function of SRv6. Please elaborate on this scenario <https://mailarchive.ietf.org/arch/msg/spring/wTLJQkzC6xwSNPbhB84VH0mLXx0> > > [2].- > https://mailarchive.ietf.org/arch/msg/spring/V0ZpjVLSVZxHaBwecXFxqJjlg_c > For example in SRv6-based L3VPN service scenario, The ingress PE within SRv6-enabled domain can utilize SR-TE policy to enable TE-path function when encapsulating and transiting L3VPN traffic, The Ingress PE push on customer packets with SID list representing SR-TE policy plus END.DT4 as last SRv6 SID in SRH; So I think, each flavor of PSP/USP/USD can be designed to perform in related SRv6 endpoint. Imaging the PSP, the penultimate Endpoint can perform PSP, e.g. copy the last SID (END.DT4) of SRH to destination field of IPv6 header and POP the SRH, then forwarding it toward egress PE identified by DA. This comment is what lead me to believe my comment in (1) then the PSP is being leveraged as a loophole to be able to perform the PSP function at any node and pop the SRH. In thinking about this it does not make sense at all. My thoughts are that the SRv6 source node ingress PE adds the SRH, and the final destination node egress PE pops the SRH. I don’t understand why any P node along the path would ever pop the SRH if you have not made it yet to the final destination. Also in the SRv6 programming PSP psuedocode it states the SL=0 has to be satisfied — so if you are on any P router and not at the final destination prefix SID FEC, then you are doing the standard IPv6 data plane forwarding and end dt x node and copying hop by hop the SID to the DA. Since the P routers are doing standard IPv6 forwarding they must comply with RFC8200. Am I missing something? > <https://mailarchive.ietf.org/arch/msg/spring/V0ZpjVLSVZxHaBwecXFxqJjlg_c> > > [3].- > https://mailarchive.ietf.org/arch/msg/spring/ssobwemrPz0uEZjvRCZP1e4l_l0 > > Removing bytes (aor adding bytes) from arbitrary positions in the middle of a > packet is generally any extremely painful operation. Why would we want a > standard that mandated such an operation? Savings a few bytes on SR hop > (sure, several IP router hops) seems a small benefit for such a cost. > I agree that not much savings adding the PSP function just to POP the SRH at an end x node That sounds weird comment for me. We have deployed that type of function with no compromise in terms of of both performance and operation within reasonable and affordable cost. <https://mailarchive.ietf.org/arch/msg/spring/ssobwemrPz0uEZjvRCZP1e4l_l0> > > [4].- > https://mailarchive.ietf.org/arch/msg/spring/KXCBHT8Tpy17S5BsJXLBS35yZbk > As of the end of 2019, the SRv6 network consists of: - 1000 Cisco NCS 5500 routers - 1800 Iliad's Nodeboxes - The network services 4.5 million mobile subscribers (as of Q3 2019) - The network is carrying 300 Gbps of commercial traffic at peak hours - It is expected to grow to more than 4000 Nodeboxes in 2020. The following SRv6 features have been deployed: - A Segment Routing Header based data plane - End (PSP), End.X (PSP), End.DT4, T.Encaps.Red, T.Insert.Red functions - BGP VPN SRv6 extensions - ISIS SRv6 extensions - SRH-based Topology Independent (TI-LFA) Fast Reroute mechanisms - Support for ping and traceroute Is this customer doing PSP in end x meaning any transit P router end dt x node? If so in those cases where the SRH is popped on end x node, was their a service overlay or SFC at the P node which was the reason to pop the SRH early on a transit P node. > <https://mailarchive.ietf.org/arch/msg/spring/KXCBHT8Tpy17S5BsJXLBS35yZbk> > > [5].- > https://mailarchive.ietf.org/arch/msg/spring/ErcErN39RIlzkL5SKNVAeEWpnAI > PSP allows us to bring SRv6 to legacy PE devices that are not capable of processing the SRH in the dataplane, but are capable of supporting SRv6 in the control plane. See this example: I am streaming traffic from a server to a customer; The ingress PE (near the server) encapsulates the packet and adds an SRH with a low-latency list of segments; The penultimate node in the SRH executes PSP; The egress PE (near the customer) decapsulates the IPv6 header and forwards the inner packet to the customer. We can include SLA unidirectionally from the server to the customer even though that the egress PE has a legacy ASIC. Legacy equipment are a reality and are not easy to replace, hence interoperability with brownfield is key for any innovative approach. This is during migration however I believe the best practice for SRv6 brown field is to have the PEs SRv6 capable and the Ps IPv6 capable for End DT x transit node forwarding only - which P routers should adhere strictly to RFC 8200 and should never have to perform or technically even have to perform the PSP function. In most SP networks the PEs are protocol and feature rich and have the latest code and hardware where the P routers “BGP free” “pim free” only perform label swapping in MPLS world and SR world only label stacking. <https://mailarchive.ietf.org/arch/msg/spring/ErcErN39RIlzkL5SKNVAeEWpnAI> > > > > I don't see the point of starting a new thread from zero that discusses > the same thing. > > > > Cheers, > > Pablo. > > > > *From: *Gyan Mishra <hayabusa...@gmail.com> > *Date: *Tuesday, 25 February 2020 at 00:35 > *To: *"Pablo Camarillo (pcamaril)" <pcama...@cisco.com> > *Cc: *Ron Bonica <rbon...@juniper.net>, SPRING WG <spring@ietf.org> > *Subject: *Re: [spring] I-D Action: > draft-ietf-spring-srv6-network-programming-10.txt > > > > > > PSP has historical context from PHP ( Penultimate Hop POP) in the MPLS > world. > > > > 20+ years ago when MPLS we originally developed the concept of PHP > implicit null reserved label value 0 was done to offload the burden of the > egress PE FEC destination to pop the entire label stack before forwarding > the native IP packet to the CE. > > > > Hardware these days for the last 15 years or so are so advanced that the > idea that you are saving processing on the egress PE has not existed for a > long time. > > > > Even back then in both SP and enterprise space there were issues that > arise related to PHB QOS egress queuing, that occurs on the PHP node that > had the MPLS shim popped, it cannot schedule on the topmost label via exp > provider markings done on the ingress PE upon label imposition. > > > > A workaround to this issue was to set explicit null label value 0 and use > pipe or uniform mode to tunnel the customer payload to the egress PE FEC > destination called UHP ultimate hop node with topmost label intact. > > > > The concept of implicit null PHP concept did not bode well in the MPLS > world so I don’t see why that feature parity would be added to a next gen > protocol that would be the future MPLS replacement. > > > > I agree with taking some of the good features and knobs from MPLS, but why > take the ones like implicit null with is really an archaic feature. > > > > My 2 cents > > > > Gyan > > > > On Mon, Feb 24, 2020 at 5:38 PM Pablo Camarillo (pcamaril) <pcamaril= > 40cisco....@dmarc.ietf.org> wrote: > > Ron, > > > > This is the 5th time that we have this discussion in the past five months.. > > > > I consider those three questions as closed based on the previous > discussion. > > https://mailarchive.ietf.org/arch/msg/spring/yRkDJlXd71k0VUqagM3D77vYcFI/ > > > > Cheers, > > Pablo. > > > > *From: *Ron Bonica <rbonica=40juniper....@dmarc.ietf.org> > *Date: *Monday, 24 February 2020 at 16:27 > *To: *Andrew Alston <andrew.als...@liquidtelecom.com>, Mark Smith < > markzzzsm...@gmail.com>, Sander Steffann <san...@steffann.nl> > *Cc: *SPRING WG <spring@ietf.org>, "Pablo Camarillo (pcamaril)" < > pcama...@cisco.com> > *Subject: *RE: [spring] I-D Action: > draft-ietf-spring-srv6-network-programming-10.txt > > > > Folks, > > > > We may need to ask the following questions: > > > > 1) Does PSP violate letter of RFC 8200? > > 2) Does PSP violate the spirit of RFC 8200? > > 3) Is PSP a good idea? > > > > The 6man WG, and not SPRING, should answer the first two questions. So I > will avoid them an explore the third. > > > > At first glance, PSP adds no value. Once Segments Left has been > decremented to 0, the Routing header becomes a NOOP. So why bother to > remove it? I see the following arguments: > > > > 1) To save bandwidth between the penultimate and ultimate segment > endpoints. > > 2) To unburden the ultimate segment endpoint from the task of > processing the SRH > > 3) To unburden the ultimate segment endpoint from the task of > removing the SRH > > > > The first argument is weak. Routing headers should not be so large that > the bandwidth they consume is an issue. > > > > The second argument is also weak. Once the ultimate segment endpoint has > examined the Segments Left field, it can ignore the SRH. The ultimate > segment endpoint must be SRv6-aware, because it must process the SID in the > IPv6 destination address field. Given that the ultimate segment endpoint is > SRv6 aware, it should be able to process the SRH on the fast path. > > > > The third argument is even weaker. The ultimate segment endpoint: > > - Has to remove the IPv6 tunnel header, anyway > > - Being closer to the edge, may be less heavily loaded than the > penultimate segment endpoint. > > > > Can anyone articulate a better justification for PSP? If not, why test the > limits of RFC 8200 over it? > > > > > Ron > > > > > > > > > > Juniper Business Use Only > > *From:* spring <spring-boun...@ietf.org> *On Behalf Of *Andrew Alston > *Sent:* Monday, February 24, 2020 5:06 AM > *To:* Mark Smith <markzzzsm...@gmail.com>; Sander Steffann < > san...@steffann.nl> > *Cc:* SPRING WG <spring@ietf.org>; Pablo Camarillo (pcamaril) <pcamaril= > 40cisco....@dmarc.ietf.org> > *Subject:* Re: [spring] I-D Action: > draft-ietf-spring-srv6-network-programming-10.txt > > > > I agree with the sentiments expressed below > > > > Andrew > > > > > > *From:* spring <spring-boun...@ietf.org> *On Behalf Of *Mark Smith > *Sent:* Monday, 24 February 2020 00:50 > *To:* Sander Steffann <san...@steffann.nl> > *Cc:* SPRING WG <spring@ietf.org>; Pablo Camarillo (pcamaril) < > pcamaril=40cisco....@dmarc.ietf.org> > *Subject:* Re: [spring] I-D Action: > draft-ietf-spring-srv6-network-programming-10.txt > > > > > > On Mon, 24 Feb 2020, 07:47 Sander Steffann, <san...@steffann.nl> wrote: > > Hi, > > > We have published a new update to > draft-ietf-spring-srv6-network-programming. This revision simplifies the > counters as per [1], clarifies the upper layer header processing as per [2] > and removes the reference to the OAM draft [3]. > > I still oppose the segment popping flavours in section 4.16 without > updating RFC8200. > > > > I would expect that defying Internet Standard 86/RFC8200 means this ID > needs to have Experimental rather than Standards Track status. > > > > > > > > > Cheers, > Sander > > _______________________________________________ > spring mailing list > spring@ietf.org > https://www.ietf.org/mailman/listinfo/spring > <https://urldefense.com/v3/__https:/www.ietf.org/mailman/listinfo/spring__;!!NEt6yMaO-gk!Tfl9m_at6pZSp38lOtxE5WZLnsW_ojrgXUvQ_Rx-tN4MY7qa-MtwIQWgGCTduGJT$> > > _______________________________________________ > spring mailing list > spring@ietf.org > https://www.ietf.org/mailman/listinfo/spring > > -- > > Gyan Mishra > > Network Engineering & Technology > > Verizon > > Silver Spring, MD 20904 > > Phone: 301 502-1347 > > Email: gyan.s.mis...@verizon.com > > > > > -- Gyan Mishra Network Engineering & Technology Verizon Silver Spring, MD 20904 Phone: 301 502-1347 Email: gyan.s.mis...@verizon.com
_______________________________________________ spring mailing list spring@ietf.org https://www.ietf.org/mailman/listinfo/spring