With questions like this it would be very helpful to be more specific with the products involved. If people want specific answers they need to provide specific details of the situation.
Craig L. Prahl, CET Fire Protection Group Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.ch2m.com On Apr 1, 2008, at 7:16 AM, [EMAIL PROTECTED] wrote: > It seems the adjacent hazard guidance is related to the operation of > sprinklers beyond the storage array. I'm interested in the radiative > heat transfer across an aisle. > > Perhaps a question for Joe - is all of the Table 13.2.1 based on fire > test data? How much is committee judgment? > > Bill Brooks > > William N. Brooks, P.E. > Brooks Fire Protection Engineering Inc. > 372 Wilett Drive > Severna Park, MD 21146 > 410-544-3620 Phone > 410-544-3032 FAX > 412-400-6528 Cell > > -------- Original Message -------- > Subject: Re: Aisle Width for Misc Storage > From: Roland Huggins <[EMAIL PROTECTED]> > Date: Mon, March 31, 2008 11:09 am > To: [email protected] > > I would start with the criteria on adjacent hazards. Seems that tells > you everything you need to know. > > Roland > > On Mar 31, 2008, at 7:38 AM, [EMAIL PROTECTED] wrote: > >> Joe, >> >> Thanks for the insight. My concern is a situation where a client has >> a Chapter 13 (2007) rack storage arrangement and wants to establish a >> "safe zone" between the rack storage and adjacent combustibles. The >> client wants to be able to say at "X" distance the target will not be >> ignited prior to sprinkler control of the rack fire. >> >> Any feel for the value of "X", again assuming Chap 13 stg? >> >> Bill Brooks >> >> William N. Brooks, P.E. >> Brooks Fire Protection Engineering Inc. >> 372 Wilett Drive >> Severna Park, MD 21146 >> 410-544-3620 Phone >> 410-544-3032 FAX >> 412-400-6528 Cell >> >> -------- Original Message -------- >> Subject: Re: Aisle Width for Misc Storage >> From: Joe Hankins <[EMAIL PROTECTED]> >> Date: Mon, March 31, 2008 10:18 am >> To: [email protected] >> >> Bill, >> It does not mean no aisle jump. In the tests that Class I-IV >> protection are based on, a test was considered successful even if >> ignition occurred across the aisle but was contained (did not burn >> through to the other >> side) of the target rack. >> Joe >> >> [EMAIL PROTECTED] wrote: >>> What is the minimum aisle width in order to use the ceiling only >>> densities for miscellaneous rack storage (Chap 13 - 2007)? Aisle >>> widths are specified in Chapter 16 but not in Chapter 13. Would this >>> width be >>> 3.5 ft per 3.9.3.7.5? >>> >>> I'm assuming this would mean there's no ignition across a 3.5 ft >>> aisle if Table 13.2.1 is applied. >>> >>> Bill Brooks >>> >>> William N. Brooks, P.E. >>> Brooks Fire Protection Engineering Inc. >>> 372 Wilett Drive >>> Severna Park, MD 21146 >>> 410-544-3620 Phone >>> 410-544-3032 FAX >>> 412-400-6528 Cell >>> To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
