I imagine, like me, you all (ya'll for some of you) on the very rare
occasions you are not working look around at sprinkler systems where you
live, shop and play.
It's a very rare occasion I don't see something that appears deficient. For
example, in a grocery store the one head on the back side of the main is
missing over HPS and a mess of piping creating a ceiling without heads under
them, at a Home Depot 190 psi on the wet side of an auxiliary dry valve, or
the local high school with sidewall heads about 15-20' down from the peak of
the very large skylight. This is all in the last two days as an example but
see similar all the time.
The sad part is I'm not really trying. What if I had the plans and calcs,
how much more would there be? Or really looked at the whole building
instead of a casual look at where I happen to be? Or the scary part what if
I actually considered the hazard vs. the design?
I also realize two issues - most times what I see probably won't cause the
system to fail in a fire IF that is the only thing wrong. There is a
"probably" and an "if " in the last sentence which means there are cases
that will fail, just not many IMHO. And second we make mistakes too.
The heads at the peak - just because an AHJ didn't call it a deficiency
doesn't mean it's OK. Certainly it is possible there is a documented and
proactively approved alternate method out there on this but I strongly doubt
it. Now I'm sure the missing head has a perfectly rational explanation of
how it got like that. The W.O. is there and it must be plugged or the
system is off. It's not a TI thing long after the original construction;
this is a very new building. Can't rationalize how you get 190 psi by
accident or approval.
MN is more regulated than most (but not all) areas. Do you see this stuff
too? What if anything can you really do about it?
Chris Cahill, P.E.
Fire Protection Engineer
Sentry Fire Protection, Inc.
763-658-4483
763-658-4921 fax
Email: [EMAIL PROTECTED]
Mail: P.O. Box 69
Waverly, MN 55390
Location: 4439 Hwy 12 SW
Waverly, MN 55390
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)