George, Let Rick get that tax money. You're going to pay it out anyways and at least it'll stay not only in America but in the industry. If he uses cheap stuff the savings might go to a study by Canadian researchers on the effects of Russian vodka on Egyptian dung beetles. I always try to get enough government money each year to pay me back for last year's taxes.
On Thu, Jul 24, 2008 at 6:27 AM, George Church <[EMAIL PROTECTED]> wrote: > I'd be concerned about two things with CPVC- > Effects of sunlight, even under the pier you'd likely get strong reflections > off the water; and where are you getting 6" CPVC? > I have no idea if regular plumber's PVC would work; if you have a > low-pressure DPV, and you're looking at a 2.5" DPV as your activating device > (and combo exhauster, it's a pretty big orifice) then wouldn't the air never > be at high pressure and so it shouldn't be a problem to use PVC? > > NFI, just a thought that would save my tax dollars versus SS316. > > glc > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Thursday, July 24, 2008 8:49 AM > To: [email protected] > Subject: RE: Deperming Pier > > What if you ran plastic, CPVC is approved for fire protection above grade > per NFPA 13. See 6.3 of NFPA 13, 2007. > > > > > > > Craig L. Prahl, CET > Fire Protection Group > Mechanical Department > CH2MHILL > Lockwood Greene > 1500 International Drive > PO Box 491, Spartanburg, SC 29304-0491 > Direct - 864.599.4102 > Fax - 864.599.8439 > [EMAIL PROTECTED] > http://www.ch2m.com > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Rick Green > Sent: Thursday, July 24, 2008 8:19 AM > To: [email protected] > Subject: Deperming Pier > > > I am installing a dry pipe system (no sprinklers) supplying four hose valves > on a pier. > > The dry pipe valve assembly is located in a heated area. Extending out from > the dry pipe valve assembly is 6" galvanized steel pipe. The steel pipe is > routed below the pier out to the location of four hose valves. > > The pier is used for Deperming ships, submarines. > > Deperming is a procedure for erasing the permanent magnetism from ships and > submarines<http://en.wikipedia.org/wiki/Submarines> to > camouflage<http://en.wikipedia.org/wiki/Camouflage> them against magnetic > detection vessels and enemy marine > mines<http://en.wikipedia.org/wiki/Naval_mines>. > > Anyway, there is about a 200' section of the pier that requires that all > materials be non-magnetic. > > * Galvanized steel pipe that NAVY specified obviously want work. > > * CPVC plastic pipe will not work because installing dry system - > correct on this right? > > * Provided them pricing for stainless steel, copper, brass and now > they want pricing for Aluminum,. > > So a few questions > > o Ever used aluminum pipe for sprinkler installations? > > o Is there some other pipe type that I am not thinking about > > Help would be most appreciated. > > Rick E. Green > District Manager > East Coast Fire Protection, Inc. > 1113 Cavalier Boulevard > Chesapeake, Virginia 23323 > 757/485-7486(p), 757/295-0956(direct), 757/328-0131(cell) [EMAIL PROTECTED] > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > -- Ron Greenman at home.... _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
