Hello George,

I am on vacation from October 17th until October 27th. Your message is
important to me and I will reply as I catch up. IF this is something that
can NOT wait until then Please send your email to [EMAIL PROTECTED]




Friday, October 24, 2008, 4:09:17 PM, you wrote:

>>From Denise at hydro flow:

> Here are the pitot formula and coefficients for all sizes of the Hose
> Monsters and Nozzle Inserts.

>      Q = 29.83 * √P * D2 * Coefficient
>      Where Q = flow rate in GPM, P = pitot pressure, D = nozzle diameter

> Product         Coefficient
> Nozzle Insert 1 1/8”   0.99
> Nozzle Insert 1 ¾”    0.975
> Hose Monster 2 ½”     0.906

>      The 4” and 4 ½” Hose Monsters actually use a different formula
> because they are not using a pitot, but these numbers work for the above
> pitot formula.
>      Product    Coefficient
>      Hose Monster 4”   0.71159
>      Hose Monster 4 ½”        0.54816

> The Pitotless Nozzles are different also.

> Links to flow charts for low, "normal" and high pressures:
> http://www.hosemonster.com/downloads/FCHM2H.pdf
> http://www.hosemonster.com/downloads/FCHM2HLP.pdf
> http://www.hosemonster.com/downloads/FCHM2HHP.pdf
>  * * * *
> Obviously, the chart is pretty darn convenient when you're in the field;
> rather than use a calculator when I've gone out without the chart, I just
> use my cel to call the office and ask someone for the GPM for my pitot
> pressure.

> Saw the pitotless nozzles last week at AFSA- pretty neat. They've come a
> long way!

> TGIF
> glc

> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:sprinklerforum-
> [EMAIL PROTECTED] On Behalf Of Todd Williams - FPDC
> Sent: Friday, October 24, 2008 2:35 PM
> To: [email protected]
> Subject: Re: Pitot Chart

> Dennis,

> Why would the pitot have a chart? Is this actually a diffuser or 
> nozzle with a built-in pitot?

> What I did with my Hose Monster was to use the chart and calc 
> backwards to come up with the K factor, then I wrote it on the HM 
> with a permanent marker. That way, if I lose the chart, oh well.


> At 02:10 PM 10/24/2008, you wrote:
>>I have a "Sierra"  brand Pitot I bought circa 1990 and my Fitter 
>>lost the chart yesterday while doing a flow test. I think it is the 
>>very similar to the one listed in the Potter Roemer catalogue. I was 
>>hoping someone could email or fax me a copy? Hate to buy a new one 
>>over the chart. Thanks in advance.
>>Fax 541 245 0498
>>Phone    245 0466


> _______________________________________________
> Sprinklerforum mailing list
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
> For Technical Assistance, send an email to: [EMAIL PROTECTED]

> To Unsubscribe, send an email to:[EMAIL PROTECTED]
> (Put the word unsubscribe in the subject field)



-- 
Best regards,
 Charles Thurston                            mailto:[EMAIL PROTECTED]
  Coastal Fire Protection

_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [EMAIL PROTECTED]

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to