Would your susceptibility to seismic events come into play? Two towers
swaying to different drummers, I'm not good at iambic pentameter on Monday
AMs, although it does seem to beg the switch here....

Towers Two
Sitting calm
Towers, too 
But somethings wong.
Towers two, shaking 
Sprinkler mains, breaking
As behemoths tither to and fro
Watch that coupling, about to blow
Insurance premiums rising
Towers Two, now demising.

Dave Sornsin

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Steve Leyton
Sent: Monday, February 02, 2009 11:35 AM
To: [email protected]
Subject: One building/one riser - location?

We have an infill project where two separate buildings - as defined by
code - are connected by a covered walkway.   Pursuant to the FI in the
sprinkler systems handbook, I'm down with the "separate
building/separate system" approach, but not the architect wants to put
both risers in one of the buildings.   Anyone have any idea if there's a
prohibition on this arrangement?   We would Christmas Tree the two
risers in one room, and then bulk down the connector to the 2nd
building.   Connector is sprinklered, BTW and code-classified as part of
the 1st building, in which the risers are located.

 

Steve Leyton

PROTECTION DESIGN & CONSULTING

8849-B Complex Drive

San Diego, CA 92123

-------------------------------------------------------------

Ph:      858.751.2930 - ext. 102

Fax:    858.751.2933

Cell:  619.972.5696

 

 

 

 

_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to