Steve, a new section (8.2.4) in the '07 version may help with this. Ed Kramer Littleton, CO
> -----Original Message----- > From: [email protected] [mailto:sprinklerforum- > [email protected]] On Behalf Of Steve Leyton > Sent: Monday, February 02, 2009 9:35 AM > To: [email protected] > Subject: One building/one riser - location? > > We have an infill project where two separate buildings - as defined by > code - are connected by a covered walkway. Pursuant to the FI in the > sprinkler systems handbook, I'm down with the "separate > building/separate system" approach, but not the architect wants to put > both risers in one of the buildings. Anyone have any idea if there's a > prohibition on this arrangement? We would Christmas Tree the two > risers in one room, and then bulk down the connector to the 2nd > building. Connector is sprinklered, BTW and code-classified as part of > the 1st building, in which the risers are located. > > > Steve Leyton > PROTECTION DESIGN & CONSULTING > 8849-B Complex Drive > San Diego, CA 92123 > ------------------------------------------------------------- > Ph: 858.751.2930 - ext. 102 > Fax: 858.751.2933 > Cell: 619.972.5696 _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
