Tom is right-on with the stainless,and there is also brass available in class 300 fittings & valves.You may have to go to a "Fluid Power" supply house such as Parker.These valves & fittings look strange,like square blocks rather than nice round shapes,but they work.The supplier you use for other specialty items should be able to direct you to a sourcefor these.Good luck!
---- Tom Duross <[email protected]> wrote: > I have a hotel in Boston I used to do, 400# churn, stainless sensing lines > and fittings. > > Tom > > > > To further emphasis what Ron said, these fittings are called CLASS 150 > (thats for malleable whereas Cast is Class 125). That is not it's > rated pressure allowance. The max pressure is indeed 300 psi for > malleable fittings but only for up to 6 inch. > > Roland > > On Aug 10, 2009, at 1:53 PM, Ron Greenman wrote: > > > If I'm not mistaken, and I have been once before, the rating written > > on the fitting (typically 150 psi) is the steam fitting rating. The > > water rating is twice that. > > > _______________________________________________ > Sprinklerforum mailing list > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
