Any grinding or trimming? Aluminum?
At 01:35 PM 11/17/2009, you wrote: >Not exactly sure but they are stamping metal car parts through three >different presses. Being its an open conveyor I believe they are not real >fine. > >Bobby Gillett >Sr. Project Manager >Key Fire Protection, Inc. >(731) 424-0130 office (731) 424-9285 fax >(731) 267-4853 cell >[email protected] > > > >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of å... .... >Sent: Tuesday, November 17, 2009 12:31 PM >To: [email protected] >Subject: Re: Tunnels > >How fine are the fines? Even reduced iron burns if you get it fine enough. >Probably not a problem for your situation, but thought the question should >be >asked. > >scot deal >excelsior fire >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) > >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
