If you have no walls to seperate corridor and breakroom areas,the entire area 
becomes one,with the same design and same sprinklers.Unless I have missed 
something.

Lamar V.

 
---- Matt Grise <[email protected]> wrote: 
> Would it be acceptable to sprinkle the corridor and breakroom to an OH1 
> density with SR heads?
> 
> Matt Grisé PE*, LEED AP 
> Sales Engineer 
> Alliance Fire Protection 
> *Licensed in KS & MO 
> 
> 913.888.0647 ph 
> 913.888.0618 f 
> 913.927.0222 cell 
> www. AFPsprink.com 
> 
> 
> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of George Church
> Sent: Tuesday, December 01, 2009 1:59 PM
> To: [email protected]
> Subject: RE: QR / SR SPRINKLER SEPARATION 
> 
> I think you're on the right track with at least an 8" lintel, but doubt that
> in the ELO hazard, we can apply the residential 8" lintel as a solution.
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Forest Wilson
> Sent: Tuesday, December 01, 2009 2:50 PM
> To: [email protected]
> Subject: RE: QR / SR SPRINKLER SEPARATION 
> 
> But standard and qr cannot be mixed within the same compartment.
> So I assume the question is definition of a compartment.
> 
> Forest Wilson Project Manager Cherokee Fire Protection Co. 1855 
> Bellbrook Ave. Ste C
> Xenia OH 45385
> ph: 937-376-2333 fx: 614-455-4324 cell: 937-307-5647 . Visit our blog: 
> www.cherokee-fire.blogspot.com NOTICE: The information contained in 
> this email is intended to be solely for the use of the named individual 
> or entity to which it is directed and may contain information that is 
> privileged or otherwise confidential. It is not intended for 
> transmission to, or receipt by, anyone other than the named addressee 
> (or a person authorized to deliver it to the named addressee). It 
> should not be copied or forwarded to any unauthorized persons. If you 
> have received this electronic mail transmission in error, please delete 
> it from your system without copying or forwarding it, and notify the 
> sender of the error by reply email or by calling Cherokee Fire 
> Protection Co. at 888-347-3079 toll free.
> 
> 
> -----Original Message-----
> From: George Church <[email protected]>
> To: [email protected]
> Sent: Tue, 1 Dec 2009 13:29:35 -0500
> Subject: RE: QR / SR SPRINKLER SEPARATION
> 
> So you've just handed him the dilemma of using SR ELO's in a light 
> hazard
> corridor......hope people don't die.
> :)
> Seriously, Dwayne, I'd use the ELOs up the corridor and then switch to 
> the
> QR in the breakroom, assuming the breakroom is separated by a wall from 
> the
> high hazard area.
> 
> glc
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Matt 
> Grise
> Sent: Tuesday, December 01, 2009 1:20 PM
> To: '[email protected]'
> Subject: RE: QR / SR SPRINKLER SEPARATION
> 
> You must protect the lower hazard area at the higher hazard level for 
> 15'
> beyond where the higher hazard ends.
> 
> Matt Grisé PE*, LEED AP
> Sales Engineer
> Alliance Fire Protection
> *Licensed in KS & MO
> 
> 913.888.0647 ph
> 913.888.0618 f
> 913.927.0222 cell
> www. AFPsprink.com
> 
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Dewayne
> Martinez
> Sent: Tuesday, December 01, 2009 12:17 PM
> To: [email protected]
> Subject: QR / SR SPRINKLER SEPARATION
> 
> I have an building where we go from an area that requires standard
> response ELO sprinklers into a light hazard hallway and break room (QR
> sprinklers) without any separation at the ceiling.  Is a draft curtain
> required between the SR / QR sprinklers or are we ok since they are two
> different hazards?
> Thanks,
> Dewayne Martinez
> Design Build Fire Protection
> New Berlin, WI
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> 
> For Technical Assistance, send an email to: [email protected]
> 
> To Unsubscribe, send an email 
> to:[email protected]
> (Put the word unsubscribe in the subject field)
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> 
> For Technical Assistance, send an email to: [email protected]
> 
> To Unsubscribe, send an email 
> to:[email protected]
> (Put the word unsubscribe in the subject field)
> 
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> 
> For Technical Assistance, send an email to: [email protected]
> 
> To Unsubscribe, send an email 
> to:[email protected]
> (Put the word unsubscribe in the subject field)
> 
> 
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> 
> For Technical Assistance, send an email to: [email protected]
> 
> To Unsubscribe, send an email to:[email protected]
> (Put the word unsubscribe in the subject field)
> 
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> 
> For Technical Assistance, send an email to: [email protected]
> 
> To Unsubscribe, send an email to:[email protected]
> (Put the word unsubscribe in the subject field)
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> 
> For Technical Assistance, send an email to: [email protected]
> 
> To Unsubscribe, send an email to:[email protected]
> (Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to