Many of today's autos have body panels and many other parts made of plastic.
(More than 10%) Valve covers intake manifolds, seats, rugs, bug deflectors,
bumper moldings, steering wheels, dash boards and more.
So in reality they are not that much different than boats. You can fill them
up with water and collapse the lift to into the vehicle below, just like a
boat. The major difference I see is that unlike a boat storage facility, you
have a building above this configuration. A building with people in it, so
now we need to consider life safety as well as property protection. Rack
storage, boat storage are both property protection systems. Your protection
needs to be better than that.

You lose a boat or car, the insurance CO pays to replace it, lose a life and
the cost becomes astronomical in today's legal system.

You should probably be looking at getting a FPE involved to spread the
liability, and consider High Ex foam or some other system that will smother
the fire. (Gas?)

The cars aren't the problem, the obstruction isn't the problem, it's the
building above that is the problem.

Thom McMahon, SET
Firetech, Inc.
2560 Copper Ridge Dr
P.O. Box 882136
Steamboat Springs, CO 80488
Tel:  970-879-7952
Fax: 970-879-7926


-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Todd Williams
Sent: Monday, March 01, 2010 8:46 AM
To: [email protected]
Subject: Re: sidewall obstruction digression

My analogy to boat storage was based on the idea that cars in a rack 
would present a similar situation to boats on a rack in terms of 
obstruction and water delivery. 


At 10:24 AM 3/1/2010, you wrote:
>Except for the pre 1910 crowd, Corvettes and Trabants (& race cars)
>these are not made of wood or fiberglass. 

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to