I agree, George. I have allowed dielectric unions but some government
agencies insist on a section of CPVC inside the SCIF within 6 inches of the
wall being penetrated.
Thank You
Rahe Loftin, P.E.
Region 7 - GSA
Office - 817-978-7299
Fax - 817-978-8644
Cell - 817-371-3102
"George Church"
<[email protected]> To
Sent by: <[email protected]>
sprinklerforum-bo cc
un...@firesprinkl
er.org Subject
RE: "SCIF" Wall Penetration
03/05/2010 06:29
AM
Please respond to
sprinklerfo...@fi
resprinkler.org
Sounds like he's asking for a dielectric union? Have run into this in
defense settings where they have anti-listening criteria to meet.
glc
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Mike Brown
Sent: Friday, March 05, 2010 7:16 AM
To: [email protected]
Subject: "SCIF" Wall Penetration
Question I am working on a project where the FPE is asking for a
"electrically isolated joint on the sprinkler feed main just inside the
wall"? Has anyone had to deal with this before...if so what did you use? 4"
Sch. 40 Main.
Thanks,
Mike Brown
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
