Test -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Todd Williams Sent: Tuesday, March 16, 2010 6:29 AM To: [email protected] Subject: Architectural Desktop
Here's one for the computer jockeys. Has anyone had problems converting drawings from architects drawn in Architectural Desktop? I am running in to situations where ceiling plans, walls at angles, etc. are not showing up or just showing as a large rectangle covering the overall area. I am using Autosprink, but the same thing is happening when I open it up in regular Autocad (2006). Thoughts? Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut 860-535-2080 www.fpdc.com _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.790 / Virus Database: 271.1.1/2748 - Release Date: 03/16/10 02:33:00 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
