good advise, thanks
On 4/7/10, George Church <[email protected]> wrote: > I'm not an attorney, but the son of a phila lawyer, I always include > specific language that we're to be held harmless, including costs of > defense, for any claim for damage(s) or injury including death that may > result from the system design being faulty. > > I'd run the form letter past an atty-for $500, you don't want to find out > the language is lacking when there's two deaths and a couple mil in lawsuits > trying to find a deep pocket. I don't want a For Sale sign across the > street. > > glc > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of tom poisal > Sent: Tuesday, April 06, 2010 7:26 PM > To: [email protected] > Subject: Re: Pre-designed systems > > I pretty much concieved a form letter, stating; the installation has > met the design criterea set forth on dwg # 1 -5 and the specific > installation notes by such and such and approved on this date by such > and such, THIS contactor is not responsible for any errors or design > flaws set forth for the above referenced documents and project, and > are the sole responsiblity by the E.O.R. and code review enforcement > personel. > > On 4/5/10, Todd - FPDC <[email protected]> wrote: >> When I get asked to quote a modular job, I double my price for exactly >> this reason. >> >> Write letters to everyone up the food chain. Someone should pay >> attention. Of not, I bet there is a guy on the Forum that will. >> >> Sent from my iPhone >> >> On Apr 5, 2010, at 6:15 PM, tom poisal <[email protected]> wrote: >> >>> I have a predesigned system for an assisted living facility, 2- >>> stories, 40.000 sq ft, combustible construction, no attic areas, >>> modular construction ie: 2 hour seperation walls between units as well >>> as 2 hr ceiling, 30 minute self closing doors etc: whereas we >>> installed the lines in the factory.....each unit faces a common >>> hallway, thus two heads in bedroom and then kitchen, open hall and >>> then reverse unit (2 heads) or living room dining room, my prob is the >>> E.O.R. only performed a 2 head calc., now..... I have a corridor (5 >>> head calc) and dining area of 840 sq ft with no opening protection >>> thus requiring the additional heads in a calc.....right?? The 1" >>> system seems inadaquite, plus the 4" fire line and "Silver Bullet" >>> backflow have been reduced to a 2" line with a watts 709 .....I have >>> serious issues signing off on this...any help...oh yeah it's in NJ >>> What are my responsibilities? Alert the AHJ, the contractor has >>> already snubbed me, "they designed it with the info >>> avaiable"....helpless in PA >>> _______________________________________________ >>> Sprinklerforum mailing list >>> [email protected] >>> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >>> >>> For Technical Assistance, send an email to: [email protected] >>> >>> To Unsubscribe, send an email to:Sprinklerforum- >>> [email protected] >>> (Put the word unsubscribe in the subject field) >> _______________________________________________ >> Sprinklerforum mailing list >> [email protected] >> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >> >> For Technical Assistance, send an email to: [email protected] >> >> To Unsubscribe, send an email to:[email protected] >> (Put the word unsubscribe in the subject field) >> > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) > _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
