that's similar to what I am thinking.
Todd, for one thing it is non-accessible unless extreme effort is
exerted. The space is 17' AFF and literally full of metal studs that
are holding up the new roof.
On 10/26/2010 3:03 PM, Brad Casterline wrote:
Kind of like a horizontal opening--- 1 row of heads 10' c-c, at the front of
the 30' depth (where it is 3' 'tall' opening)? This would keep the heat from
accumulating back there- but we do not have to put water on non-comb roofs.
-----Original Message-----
From: Greg McGahan [mailto:[email protected]]
Sent: Tuesday, October 26, 2010 2:18 PM
To: [email protected]
Subject: overlapping buildings
We have a new metal building that is being built such that the roof
overlaps an existing metal roof therefore leaving an uninhabited,
non-combustible, triangular shaped space that is open to the interior of
the new building. This space is approximately 30' in depth, about 3'
high where the overlap starts and goes to 0" eventually where the roofs
actually meet.
What do we do?
Thanks,
Greg
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
--
Greg C. McGahan Living Water Fire Protection, LLC. 1160 McKenzie Road
Cantonment, FL 32533 850-937-1850 Fax 850-937-1852
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
