Back in the day (when the earth was new) we would cut everything to fit. That was our job as designers.
Thank you, Sharon Alves Senior Fire Sprinkler Specialist, Project Manager, SET LP Consulting Engineers, Inc. MEP/FS . Sustainability . CxA 1663 Eureka Rd - Roseville, CA 95661 (916) 771-0778 x114 [email protected] www.lpengineers.com This email and its attachments are the sole property of LP Consulting Engineers, Inc. and Copyrighted by LP Consulting Engineers, Inc. 2013. This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication. The sender and its company do not guarantee that this email or its attachments is free of viruses nor does it accept any liability for same. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Aaron Peck Sent: Thursday, March 13, 2014 9:35 AM To: [email protected] Cc: [email protected] Subject: Re: Pre-fabbed Hangers and Drops Better men then me can do it. I was hit or miss. More miss than hit. I would even run it by the field super to make sure I was figuring it right. Usually took me actually doing a small mock up in the shop to be 100% sure. There was a guy in my office when I started. He could have the whole job pre-fabbed and he usually had a 97% fit rate. God speed! Sent from my iPhone Aaron M. Peck, SET Fire Protection Skype +1(202)407-9079 Cambodia +855(0)78700407 > On Mar 13, 2014, at 10:41 PM, Brad Casterline <[email protected]> wrote: > > My confidence level is a bit low and I would appreciate a boost: > > I'm hanging 1" thru 2" pipe at center of 19" below smooth concrete, > using drop-in anchors. Elevation-wise this puts me center 5" above > finished ceiling. > > I'm using 2-pc deep escutcheon. > > For simplicity I'm thinking 3/8x18" A.T.R. and 5" drops should work? > > > > Thanks, > > Brad > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
