I hate to admit it, but I calculated grids by hand. 

Thank you,

Sharon Alves
Senior Fire Sprinkler Specialist, Project Manager, SET



LP Consulting Engineers, Inc.
MEP/FS . Sustainability . CxA
1663 Eureka Rd - Roseville, CA  95661
(916) 771-0778 x114
[email protected]
www.lpengineers.com


This email and its attachments are the sole property of LP Consulting 
Engineers, Inc. and Copyrighted by LP Consulting Engineers, Inc. 2013.  This 
communication with its contents may contain confidential and/or legally 
privileged information. It is solely for the use of the intended recipient(s). 
Unauthorized interception, review, use or disclosure is prohibited and may 
violate applicable laws including the Electronic Communications Privacy Act. If 
you are not the intended recipient, please contact the sender and destroy all 
copies of the communication.  The sender and its company do not guarantee that 
this email or its attachments is free of viruses nor does it accept any 
liability for same.

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Aaron Peck
Sent: Thursday, March 13, 2014 9:58 AM
To: [email protected]
Subject: Re: Pre-fabbed Hangers and Drops

Was that along with punchcard hydraulics? Lol 

I wish I had been better but I had my moments of very nice fit jobs. 
Coordinating around huge duct work. The foreman called me out to find out what 
I was on during this design. I just said wait and see. He was amazed when the 
duct came in and it worked perfectly. 

More proper coordination instead of prefab.

Sent from my iPhone
Aaron M. Peck, SET Fire Protection
Skype +1(202)407-9079
Cambodia +855(0)78700407

> On Mar 13, 2014, at 11:47 PM, Sharon Alves <[email protected]> wrote:
> 
> Back in the day (when the earth was new) we would cut everything to fit.  
> That was our job as designers.
> 
> Thank you,
> 
> Sharon Alves
> Senior Fire Sprinkler Specialist, Project Manager, SET
> 
> 
> 
> LP Consulting Engineers, Inc.
> MEP/FS . Sustainability . CxA
> 1663 Eureka Rd - Roseville, CA  95661
> (916) 771-0778 x114
> [email protected]
> www.lpengineers.com
> 
> 
> This email and its attachments are the sole property of LP Consulting 
> Engineers, Inc. and Copyrighted by LP Consulting Engineers, Inc. 2013.  This 
> communication with its contents may contain confidential and/or legally 
> privileged information. It is solely for the use of the intended 
> recipient(s). Unauthorized interception, review, use or disclosure is 
> prohibited and may violate applicable laws including the Electronic 
> Communications Privacy Act. If you are not the intended recipient, please 
> contact the sender and destroy all copies of the communication.  The sender 
> and its company do not guarantee that this email or its attachments is free 
> of viruses nor does it accept any liability for same.
> 
> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of 
> Aaron Peck
> Sent: Thursday, March 13, 2014 9:35 AM
> To: [email protected]
> Cc: [email protected]
> Subject: Re: Pre-fabbed Hangers and Drops
> 
> Better men then me can do it. I was hit or miss. More miss than hit. I would 
> even run it by the field super to make sure I was figuring it right. 
> 
> Usually took me actually doing a small mock up in the shop to be 100% sure.
> 
> There was a guy in my office when I started. He could have the whole job 
> pre-fabbed and he usually had a 97% fit rate.
> 
> God speed!
> 
> Sent from my iPhone
> Aaron M. Peck, SET Fire Protection
> Skype +1(202)407-9079
> Cambodia +855(0)78700407
> 
>> On Mar 13, 2014, at 10:41 PM, Brad Casterline <[email protected]> 
>> wrote:
>> 
>> My confidence level is a bit low and I would appreciate a boost:
>> 
>> I'm hanging 1" thru 2" pipe at center of 19" below smooth concrete, 
>> using drop-in anchors. Elevation-wise this puts me center 5" above 
>> finished ceiling.
>> 
>> I'm using 2-pc deep escutcheon.
>> 
>> For simplicity I'm thinking 3/8x18" A.T.R. and 5" drops should work?
>> 
>> 
>> 
>> Thanks,
>> 
>> Brad
>> 
>> _______________________________________________
>> Sprinklerforum mailing list
>> [email protected]
>> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprink
>> l
>> er.org
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl
> er.org _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl
> er.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to