No. I’ll send you a picture Ron.

Thanks Charles.

Scott

Office: (763) 425-1001 x 2
Cell: (612) 759-5556

From: Sprinklerforum [mailto:[email protected]] On 
Behalf Of rongreenman .
Sent: Tuesday, May 17, 2016 11:38 PM
To: Charles Thurston <[email protected]>; 
[email protected]
Subject: Re: Tyco Dry Pipe Valve

So not the Tee, Charles?


On Tue, May 17, 2016 at 8:37 PM, Charles Thurston 
<[email protected]<mailto:[email protected]>> wrote:
Hello rongreenman,

The restriction is in the casting for the body of the valve. I have seen it and 
warned my guys to be very careful cleaning the seats.

Tuesday, May 17, 2016, 9:38:12 PM, you wrote:

> I'm surprised that something this unusual isn't even listed as a special part 
> on the cut sheets. They just say ¾" x whatever x whatever. Purpose of the 
> restriction?


> Talk to Tyco.

> On Tue, May 17, 2016 at 6:35 PM, Scott Futrell 
> <[email protected]<mailto:[email protected]>> wrote:

>
>
>
> Ron,
>
>
>
> Nope, it’s designed that way. I’ve asked fitters to look, and I’ve looked at 
> new ones off the truck. That’s the way it comes. Data sheet doesn’t show it, 
> or say anything  about it.
>
>
>
> Nope.
>
>
>
> I’m thinking most don’t realize this, and most don’t realize wiping off the 
> seat pushes the gunk into the slot that leads to the two holes.
>
>
>
> Scott
>
>
>
> Office: (763) 425-1001 x 202<tel:%28763%29%20425-1001%20x%20202>
>
> Cell: (612) 759-5556<tel:%28612%29%20759-5556>
>
>
>
> From: Sprinklerforum 
> [mailto:[email protected]<mailto:[email protected]>]
>  On Behalf Of rongreenman .
>  Sent: Tuesday, May 17, 2016 8:31 PM
>  To: 
> [email protected]<mailto:[email protected]>
>  Subject: Re: Tyco Dry Pipe Valve
>
>
>
>
> Maybe just a bad casting. Nothing about that in the cut sheet and that would 
> be some neon flashing sign if there was a special tee in the alarm line.
>
>
>
>
>
> Have you talked to Tyco?
>
>
>
>
>
> As an example of this Viking has special ball drips that work only on 
> designated valve trims. One that will not work with a DPV may be for a deluge 
> valve.The info for this is glaring when you actually go looking for it. 
> http://www.vikinggroupinc.com/databook/checkvalves/062289.pdf
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
>  Sprinklerforum mailing list
>  
> [email protected]<mailto:[email protected]>
>  http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
>








--
Best regards,
 Charles                            
mailto:[email protected]<mailto:[email protected]>

_______________________________________________
Sprinklerforum mailing list
[email protected]<mailto:[email protected]>
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org



--
Ron Greenman

4110 Olson Dr., NW
Gig Harbor, WA 98335

[email protected]<mailto:[email protected]>

253.576.9700

A problem well stated is a problem half solved. -Charles F. Kettering, inventor 
and engineer (1876-1958)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to