The cut sheet says I'd have to put heads in every channel, no-bueno. I have it designed using CMSA heads but the calc's are killing me.
Brian Harris, CET BVS Systems Inc. bvssytemsinc.com<http://bvssystemsinc.com/> From: Sprinklerforum [mailto:[email protected]] On Behalf Of Matt Grise Sent: Thursday, February 15, 2018 4:31 PM To: [email protected] Subject: RE: ESFR Heads in Concrete Tee's Any way to offset the lines? I can't recall if that is allowed with ESFR's. The last time I had a concrete T roof, I went with CMSA. Matt From: Sprinklerforum [mailto:[email protected]] On Behalf Of Brian Harris Sent: Thursday, February 15, 2018 3:29 PM To: [email protected]<mailto:[email protected]> Subject: ESFR Heads in Concrete Tee's Looking for some confirmation that ESFR heads cannot be used with concrete tee construction when the tee is 26" deep. Cut sheet says in this case you'd have to put them in each bay but also says heads can't be closer than 8', tee's are 6' on center. Brian Harris, CET BVS Systems Inc. Design Manager bvssystemsinc.com<http://bvssystemsinc.com/> Phone: 704.896.9989 Fax: 704.896.1935
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
