Unistrut, bolts, clamps, etc. would rust in the trench, wouldn't they? Is there the chance that this pipe could be laying in water?
Craig L. Prahl Fire Protection Group Lead/SME Direct - 864.920.7540 Fax - 864.920.7129 Direct Extension 77540 CH2M is now Jacobs. 200 Verdae Blvd. Greenville, SC 29607 [email protected] http://www.jacobs.com -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Jeff Normand Sent: Wednesday, March 14, 2018 1:57 PM To: [email protected] Subject: Re: Supporting pipe in bottom of pre-cast trench [EXTERNAL] Unistrut, Quik Bots and Riser Clamps per structural engineer on job I did. Of course he stamped the detail and I'm sure he charged for it. On Wed, Mar 14, 2018 at 12:51 PM, Ben Young <[email protected]> wrote: > I've got to run a 4" deluge pipe inside a pre-cast concrete trench for > about 120 feet. > This goes across a roadway to a loading dock, and the lid of the > trench is also concrete (IE, not mesh or open). > > Space isn't a huge issue, since we have the bottom of the trench to > ourselves. > > I'm just thinking there should be a better or simpler way to support > the pipe besides very small pipe stands, or using riser clamps rodded > down to drop-ins in the base. > > concrete for the trench is 6" thick. > I cannot go more than about a foot off the bottom as the top part of > the trench is reserved for the process piping. > > > I mean, I know there are ways to support the pipe since we work > alongside a mechanical division, but none of theirs appear to be listed. > > Has anyone come up with a better solution besides the riser clamps, > pipe stands, or angle brackets? > > > > Benjamin Young > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: <http://lists.firesprinkler.org/private.cgi/ > sprinklerforum-firesprinkler.org/attachments/20180314/ > ee043373/attachment.html> > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler. > org > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.firesprinkler.org/private.cgi/sprinklerforum-firesprinkler.org/attachments/20180314/2054c96f/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
