Hi Hassan,
Did you read the page:
http://www.squid-cache.org/Versions/v2/2.7/cfgman/http_port.html
Yes I did read it and I read a great deal more and I have been on many
forums, and I have been through the mailing list and and...
Yes it says it clearly but what it doesn't say clearly is whether your
clients can have access to the internet and let people access your websites
via a proxy
that's what I was asking.
Under "vhost", it clearly says:
Accelerator mode using Host header for virtual domain support. Implies
accel.
So, if you want Squid listener on 3128 to be acting as "forward
proxy", then don't use "vhost". When your internal users are hitting
squid for regular internet usage, every port 80 website is
automatically proxied, including your internal ones.
If it is not working, then there must be a relevant line in the
"access.log" or "cache.log" which will tell you what happened to that
request.
You are configuring the same box for both "forward" and "reverse"
proxy, which can be tricky. If you are indeed a "developer" (and no,
writing HTML does not count), then you need to use your programming
hat a bit more when you're trying to even configure open source
software.
Did you read:
http://wiki.squid-cache.org/SquidFaq/ReverseProxy
It explains a lot of "concepts". Please go through them, and try to
understand how all this is supposed to work.
Yes I have read this too
Please do not "bombard" the list with email after email without
getting a response first. Not nice.
Most irritating is when someone:
1. appears to not have "read the manual" with great care
(read it)
2. appears to have not "searched" the internet for this problem
(Done it)
3. starts to blame the software because they can't make it work
(yes because some softwares are badly written)
4. starts to "whine" on the mailing list, and sends emails one after
(I thought that was where you can get help, No?)
another without waiting for an acceptable time (at least 48 hours) for
(I oly did it once, because I forgot something or I had something else to
add)
someone to respond
Regards
HASSAN
I don't understand why is it that you never help oin this mailing list the
only time we see you is when somebody complains
then suddenly you popup from somewhere all the time you keep silent, you
never help with solutions or suggestions.
Yes Squid whether you like it or not is by far not the easiest piece of
software to use or to configure it doesn't mean it is brilliant
It's difficult and I know it can be made to be a lot easier et user friendly
without having to go a great length of time to understand
it's logic, not because you used it for a long time or you are somehow
involved that you think everybody should open the box and get it to work
If that was the case, why then we have the mailing list?? If that was as
simple as you're trying to make out.
Please if you the only time you show up is to tell me what and I mustn't do
then spare me your moral lectures on how I should behave.
If this mailing list is "yours" and I am irritating you then say so I will
leave and leave you in peace.
Other than that please keep away from me
This is the second time and it's ones too many.
Regards
Adam
On Mon, Mar 29, 2010 at 1:55 AM, a...@gmail <adbas...@googlemail.com> wrote:
Hi Again,
Well my local network can't access the Internet since I had to put the
vhost option on the http_port 3128
They can access my sites internally not a problem, but the problem is they
can no longer access the internet
I have kept the original config
The only thing I have changed was adding the acceleration mode for my
backend server (sites) and add the vhost option after
the http_port 3128
like this
http_port 3128 vhost
I hope that makes more sense
Regards
Adam
----- Original Message ----- From: "Ron Wheeler"
<rwhee...@artifact-software.com>
To: "a...@gmail" <adbas...@googlemail.com>; <squid-users@squid-cache.org>
Sent: Sunday, March 28, 2010 8:40 PM
Subject: Re: [squid-users] Help with accelerated site
Are you trying to build an accellerator for your site or a proxy.
Pick one and get it to work.
The config that I sent you is an accelerator.
I would suggest to stick with the accelerator and let your inside guys
hit your server on port 80.
1) Put your backend server back on port 80
http_port 80 accel vhost defaultsite=www.mysite.org
cache_peer 192.168.1.3 parent 80 .... whatever I had in my config should
be fine once you change my 81 to 80. I needed to use 81 since I had both
apache and squid on the same machine. You do not have this problem.
This way your inside guys are still hitting your backend the old
fashioned way and your clients are coming through your front door with a
caching proxy.
Get rid of the acl stuff until you get it going and then decide how to
block people.
Check my acl settings but I do not recall doing anything to control
access.
KISS
Good luck
Ron
a...@gmail wrote:
Hi Amos,
Thanks for your time
at the moment my config is as follow it's working as far is the
acceleration mode is concerned
http_port 80 accel vhost defaultsite=www.mysite.org
cache_peer 192.168.1.3 parent 81 0 no-query originserver name=main
acl out_sites dstdomain www.mysite.org www.mysite.com www.mysite.net
http_access allow our_sites
cache_peer_access main allow our_sites
cache_peer_access deny all
I can access my 3 websites from inside my network and from the
"Internet" no problems
apart for it being a little slower than before, but it's working
The problem I have right now is None of clients can access the internet
The error as before "The requested URL could not be retrieved"
here is the other part of config
acl manager proto cache object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8.0.0.0/32
acl localnet src 10.0.0.0/8
acl localnet src 172.16.0.0/12
acl our_network 192.168.1.0/24
http_access allow manager localhost
http_access deny manager
http_access allow localnet
http_access deny all
http_access allow our_network
http_access deny all
htcp_access allow localnet
htcp_access deny all
icp_access allow localnet
icp_access deny all
http_port 3128 vhost (note if I remove the vhost I won't access my
websites) if I leave it I can't access the internet from my local
network)
No "Bind" error at this time
I hope that would help see if there's anything wrong with the
configuration
Regards
Adam
----- Original Message ----- From: "Amos Jeffries"
<squ...@treenet.co.nz>
To: <squid-users@squid-cache.org>
Sent: Sunday, March 28, 2010 8:06 AM
Subject: Re: [squid-users] Help with accelerated site
a...@gmail wrote:
Hi Ron,
Thanks for your reply and thanks for your time
This is perhaps the 10th time I uninstalled it and reinstalled it
And this is the very first time I could access my websites internally,
externally nothing yet, I am still getting the error
This error:
The following error was encountered while trying to retrieve the URL:
/
... appearing in a reverse-proxy setup means Squid received a
reverse-proxy/accelerated request intended for a web server on a port
without "accel" flag configured.
Please read all my notes below right to the end of the email before
changing anything. I'm commenting on each fine detail and what it
means...
My clients can all access the internet, Yes I am sure that there's a
misconfiguration in my config file but I followed every tutorial
trying desperately to get something up, after a while you're saturated
and very tired, bouncing from on issue to another
... so, we need you to stop bouncing and concentrate on one issue at a
time. When we are satisfied that you are understanding that one move on
...
I checked and triple checked my iptables rules everything looks fine
so far
For instance, my backend server is listening right now on port 81, why
did I put it on port 81 because I was getting
Cannot bind to .... in the log file
so I changed it to 81 and I am getting the same error, there's
absolutely nothing else in my entire network that is using that port
So why can't it bind to port 81? You see the type of things that can
drive you through the wall
at the moment I have only three machines
A is Running the Proxy and the Router (IPTABLES)
B is the back end server
C is the DNS/DHCP servers
And only the backend server that is currently listening on port 81 and
before that it was listening on port 80
no matter which port I put in my config I get the "Cannot bind to
...." in the log file
... from the below I'd guess you are changing both the Squid http_port
and the apache listening "Port" entries at the same time in your tests.
here is a bit of my config
*********************************************************************
http_port 192.168.1.3:81 accel parent vhost defaultsite=www.mysite.org
The tutorial and advice so far as I've seen has been to place Squid
listening on "http_port 80 accel vhost" and apache listening on "Port
81".
Okay stop here. Check that. Make it so. Restart both software if
needed.
If another "bind" error comes up during the restart let us know right
now.
Continue reading...
cache_peer 192.168.1.3 parent 81 0 no-query originserver name=main
Those two lines are (or 'were' right?) a loop.
Squid listening on 192.168.1.3 port 81 is to fetch requests from source
server listening on 192.168.1.3 port 81.
What you should have after my suggested change above is:
Squid listening on port 80 fetched from server on port 81.
Test this:
fetch a request for http://192.168.1.3:81/
EXPECTED: results in the apache "it works", or your <VirtualHost *>
site.
fetch a request for http://192.168.1.3/
EXPECTED: results in the apache "it works", or your <VirtualHost*>
site. Received through Squid.
(using wget, curl, or squidclient to display the response errors the
second fetch there should contains Via: header which is not present in
the first fetch.)
IF (and only if) there was no "bind" error, and the headers check above
fails to show a Via: header properly. We work on that in next email...
acl dstdomain our_sites dstdomain www.mysite1.org www.mysite2.com
www.mysite3.net
http_allow_access main allow our_sites
http_peer_access main deny all
At the moment all of these sites are running on the same server
(virtualhost)
The only thing I am not sure of is probably the cache_peer directive
"cache_peer 192.168.1.3 parent 81 0 no-query originserver name=main"
If it's wrong then I don't know what to put in there
The IP address and port of your Apache server.
Amos
--
Please be using
Current Stable Squid 2.7.STABLE8 or 3.0.STABLE25
Current Beta Squid 3.1.0.18
