Hi Dave,
If you can get the correct change gears to generate the thread pitch
you need and the internal or external thread goes right up to a
shoulder and you want to "do it your self" do the following: First
make sure that you are opening the correct pitch by machining
anything cylindrical. Just a scratch will do for checking. Then
chuck the item you want to cut threads on and do it by hand. You
don't have to use the lathe's motor to rotate the chuck for
threading. Rotate the chuck by hand. This way you have very precise
control to get up against the shoulder. Since you are opening a very
small .5 mm pitch on a copper alloy you don't have to worry about
feeding the cutting tool in at a 59º or 60º angle. You can just
plunge in at 90º and in 3 or 4 light cuts you will have what you are
trying to do the first time.
Arthur--Mexico City
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html