On 08/26, Govindraj Raja wrote:
> From: Zdenko Pulitika <zdenko.pulit...@imgtec.com>
>
> .recalc_rate callback for the fractional PLL doesn't take operating
> mode into account when calculating PLL rate. This results in
> the incorrect PLL rates when PLL is operating in integer mode.
>
> Operating mode of fractional PLL is based on the value of the
> fractional divider. Currently it assumes that the PLL will always
> be configured in fractional mode which may not be
> the case. This may result in the wrong output frequency.
>
> Also vco was calculated based on the current operating mode which
> makes no sense because .set_rate is setting operating mode. Instead,
> vco should be calculated using PLL settings that are about to be set.
>
> Fixes: 43049b0c83f17("CLK: Pistachio: Add PLL driver")
> Cc: <stable@vger.kernel.org> # 4.1
> Reviewed-by: Andrew Bresticker <abres...@chromium.org>
> Signed-off-by: Zdenko Pulitika <zdenko.pulit...@imgtec.com>
> Signed-off-by: Govindraj Raja <govindraj.r...@imgtec.com>
> ---
Applied to clk-next
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
