Mohamed Ali wrote:
Dear forum users,
My management asked me to setup and configure 2x SRSS in a failover
group. Due to budget reason, they asked me to install and configure 1x
SRSS and later after 6 month or at the end of the year, they will
purchase a server and will ask me to configure as Secondary server in
SRSS failover group.
First just configure single SRSS server and once the new server came
then configure FOG.
i.e
1. Install SRSS on existing Server say A & reboot
2. Run utconfig
3. Run utadm
After 6 months say you got the server B do the following steps:
1. Install SRSS on new server B & reboot
2. Run utconfig ( select admin password & groupsignature as same as
server A )
3. Run utadm
4. Run utreplica -p serverB on serverA
5. Run utreplica -s serverA on serverB
Done . Now you have a FOG with serverA & serverB :-).
THanks
P.S.M.Swamiji
Note:These are my personal opinions,nothing to do with my employer
How the above case be possible. Any advise is appreciated.
FYI, last year i have setup 2x Sun Ray servers in a failover group in
one shot. But the above case is different.
Thanks.
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
