From: Jerry Roberts <[EMAIL PROTECTED]> My daughter wants to upgrade her C600 from the stock RAM (I think, 32mb) to the max of 144mb. That would take a 128mb chip to go along with the 16mb on-board, right?
From what I've seen, it seems like the RAM that goes with the S900s would also work in the C600 series. Please advise if this is the case.
No, this is not the case. What you want is two 64 meg DIMMS. The 128 meg DIMMS will not work in the C600. You want the 168 Pin Mac 5V DIMM 60NS 2K, either FPM or EDO, available quite cheaply from -
Jerry, what Dan says is correct but I have a Umax 160/2000 (I'm in UK) similar to C500 and the handbook that came with it recommends EDO chips, although it implies FPM will work, but not as comfortably.
Cheers Ron
-- SuperMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
