-----Original Message----- From: Pablo Montoro Escaño [mailto:[EMAIL PROTECTED] Sent: April 26, 2007 7:26 AM To: support@pfsense.com Subject: Re: AW: AW: [pfSense Support] OpenVPN problem in 1.2
The rules don't appear neither in Client nor in Server. I don't know if if it's working, but I have passed the configuration to an old image (1.0.1) and I could see the rules created. So I think the rules are, but it is just they don't appear. Fuchs, Martin wrote: > That's very strange... > > I'm running 4 systems by now with this snapshot and it really works fine... > > Let me ask: it's when you creatre the client or server settings that > they disappear afterwards ? but they work ? or don't they work properly ? > > ---------------------------------------------------------------------- > -- > *Von:* Pablo Montoro Escaño > *Gesendet:* Do 26.04.2007 10:27 > *An:* support@pfsense.com > *Betreff:* Re: AW: [pfSense Support] OpenVPN problem in 1.2 > > Tested. Same results! > > There is still the problem. :( > > I think the rules are created in somewhere, but the problem is that > they are not shown. > > Thanks for the help. > > > Fuchs, Martin wrote: >> Please try an image from here: >> http://pfsense.trendchiller.com/DISTRIBUTION/1.2-BETA-1-PRERELEASE/ >> >> any changes ? >> >> Regards, >> >> Martin >> >> -----Ursprüngliche Nachricht----- >> Von: Pablo Montoro Escaño [mailto:[EMAIL PROTECTED] >> Gesendet: Mittwoch, 25. April 2007 12:04 >> An: support@pfsense.com >> Betreff: Re: [pfSense Support] OpenVPN problem in 1.2 >> >> Still have the problem. >> >> PRERELEASE of 1.2-BETA-1, embedded, downloaded this morning, with date 25 of April. >> >> >> Scott Ullrich wrote: >>> That was fixed a day or so ago. >>> >>> And please keep in mind this is a PRERELEASE of 1.2-BETA-1. This is >>> NOT 1.2-BETA-1... >>> >>> Scott >>> >>> On 4/24/07, Pablo Montoro Escaño <[EMAIL PROTECTED]> wrote: >>>> We are testing the beta 1 of pfSense 1.2 and we have found that the >>>> OpenVPN has a problem that it had not in 1.0.1. >>>> >>>> Trying to create a configuration in the server or client tag, after >>>> pressing Save it returns to the OpenVPN with no rules created. >>>> >>>> The same has been done (exactly the same) in a pfSense 1.0.1 and >>>> the rule has been created correctly. >>>> >>>> a bug? >>>> >>>> ------------------------------------------------------------------- >>>> -- To unsubscribe, e-mail: [EMAIL PROTECTED] For >>>> additional commands, e-mail: [EMAIL PROTECTED] >>>> >>>> >>> -------------------------------------------------------------------- >>> - To unsubscribe, e-mail: [EMAIL PROTECTED] For >>> additional commands, e-mail: [EMAIL PROTECTED] >>> >>> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] For >> additional commands, e-mail: [EMAIL PROTECTED] >> >> Hey, I don't know if you have the same problem I had on one system, but it was related to this: http://forum.pfsense.org/index.php/topic,4103.0.html When I updated to the latest 1.2 Beta Prerelease for some reason my OpenVPN configuration disappeared. So I set it all up again, and still, it didn't show up. So I searched around and found that forum topic. Sure enough I edited the /conf/config.xml in the WebGUI, took out the <config/> just below the <openvpnserver> which happened to be above my actual configuration and rebooted, and voila, it was all working again!! Check that out and see if helps you in this situation. JC --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]