I've modified the configuration file to point to vr0/vr1/vr2 as
appropriate, however there is no active IP where I expect it, on any
of the ports.
If anybody could confirm the interface names or provide a working
sample of config.xml, it would be much appreciated.
-Galen
On Jan 26, 2008, at 3:25 PM, [EMAIL PROTECTED] wrote:
Ah ha!
I knew it was not working.
I will see if I can adjust the configuration for the vr0 interface.
Also, I would love to see an example of a file like this...
-Galen
On Jan 26, 2008, at 12:56 PM, Fernando Sanchez wrote:
You do have to use the serial port to assign interfaces on ALIX
boards, since they were changed to vr0, I wish they would apply the
m0n0wall patch which fixes because I don't have any motherboards with
serial ports.
On Jan 26, 2008 12:53 PM, Vivek Khera <[EMAIL PROTECTED]> wrote:
On Jan 26, 2008, at 10:32 AM, [EMAIL PROTECTED] wrote:
I am having trouble with this point and would appreciate a example
configurational file that will allow at least one of the ethernet
ports to grab an IP via DHCP, or just have a static IP...
something... anything. The basic problem is that I don't have a
serial cable anywhere! (I thought I was done with such old
technologies!)
by default, the LAN answers as 192.168.1.1 so just take a laptop or
other computer, right it to IP 192.168.1.2, and then configure your
box as you see fit. or you can ssh into it and set the IP that
way if
you prefer.
you don't *have* to have the serial port to do the initial config.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
