I am trying to use DHCP on both, and I think that may be a reasonable explanation. If I pull a lease by other methods and then plug that info in as static, would that likely work? I still have a problem with Gateways though. I can't seem to pull a new IP/Gateway like I used to, by changing my spoofed MAC and at the moment, both modems are pulling IPs with the same gateway. Only other solution is the double NAT right (or something a bit more tricky like 1:1 NAT)?
Thanks for the help. I expected this to be a common occurrence, but the response I've seen (aside from yours) says otherwise. _____ From: Curtis LaMasters [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 05, 2008 10:05 PM To: support@pfsense.com Subject: Re: [pfSense Support] Message repeating in System Log, can't find the reason Seperate interfaces should work. BSR is nothing more than broadband services router. I think Cox uses the AMT / Motorola BSR64000. Are you using DHCP on both interfaces. I may be mistaken but I though pfSense only supported 1 DHCP connection on the WAN, the other has to be a static. Don't quote me on that though. Curtis