Anyone....Bueler....Bueler....?
-W
On Tue, 2008-04-29 at 06:41 -0700, Wade Blackwell wrote:
> Good morning PFsense fans,
> Greetings from the starting to get sunny Northwest. I am not sure if
> what I am trying can be done or not. In concept I know it's possible but
> I am not seeing the desired results where the rubber meets the road.
> Basic setup is this;
>
> Network A
> 1.1.1.1/24
> |
> |
> |
> I-net----PF---PPTP clients 3.3.3.3/28
> |
> |
> |
> IPsec tunnel to 2.2.2.0/24
>
> Goal: To have PPTP clients connect in and connect to the PF and then
> have access to 2.2.2.0/24 over the IPsec tunnel. The tricky part (I am
> assuming) is that for the tunnel to come up the PPTP clients to bring
> the IPsec tunnel up they need to be sourced from 1.1.1.0/24. What I did,
> attempting to make this work, was to setup the advanced outbound NAT
> allowing all PPTP clients destined for 2.2.2.0/24 to be natted with the
> interface IP of network A. I am running 1.2-RC2 if that has any bearing.
> If anyone has tried this or has some insight I would be stoked. Thanks
> all.
--
Wade B
"integrity is often more painful and always more profitable than
perception management"
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
