I can't access the microdrive, as it's formatted for pfSense, and windows xp
just asks to reformat every time I try and see the disk. So here are 2 logs
I pulled from TeraTerm, that show the boot process and where it's stuck, and
my attempts to boot it. Thanks again!
-patrick
Start log 1:
PC Engines ALIX.2 v0.99
640 KB Base Memory
1536031744481286451280896972801136641300481464321628161792001955842119682283
52244736261120 KB Extended Memory
Waiting for HDD ...
01F0 Master 848A ST650211CF
Phys C/H/S 9690/16/63 Log C/H/S 608/255/63 LBA
-\|/-\|//bboooott..ccoonnffiigg::
--DD//--\\||//--\\||//--\\||//--\\||//--
\\||//--\\||//--\\||//--\\||//--\\||//
--\\||//--\\||//--\\||//--\\||//--\\||
//--\\Consoles: internal video/keyboard serial port
BIOS drive C: is disk0
BIOS 640kB/261120kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
([EMAIL PROTECTED], Sun Feb 24 16:20:44 EST 2008)
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
-\|/-\|/-\|/-\|/-\|/-\Loading
/boot/defaults/loader.conf
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
-\|/-\|/-\|/-\|/boot/kernel/kernel text=0x4b9580
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|
/data=0x90ab4+0x42638
-\|/-\|/-\|/-syms=[0x4+0x5ab50\|/-\|/-\+0x4+0x7
21b4|/-\|/-]
\|/-\|/-\|/-\|/-\|/-\ ______ | ____| __ ___
___ | |__ | '__/ _ \/ _ \ | __|| | | __/ __/ | | | | | |
| |_| |_| \___|\___| ____ _____ _____ | _ \ / ____| __ \
| |_) | (___ | | | | | _ < \___ \| | | | | |_) |____) | |__| | |
| | |
|____/|_____/|_____/³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÚÀ¿ÙWelcome
to FreeBSD!1 . Boot FreeBSD [default]2 . Boot FreeBSD with ACPI enabled3 .
Boot FreeBSD in Safe Mode4 . Boot FreeBSD in single user mode5 . Boot
FreeBSD with verbose logging6 . Escape to loader prompt7 . RebootSelect
option, [Enter] for defaultor [Space] to pause timer 1 1 1 1 1 1 1 1 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |/-\|/-Copyright (c) 1992-2007 The
FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p11 #0: Sun Feb 24 16:38:29 EST 2008
[EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense_wrap.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x5a2 Stepping = 2
Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
AMD Features=0xc0400000<MMX+,3DNow+,3DNow>
real memory = 268435456 (256 MB)
avail memory = 253272064 (241 MB)
pnpbios: Bad PnP BIOS data checksum
wlan: mac acl policy registered
K6-family MTRR support enabled (2 registers)
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
MFGPT bar: f00100006200
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver
attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem
0xe0000000-0xe0
0000ff irq 10 at device 9.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0d:b9:13:b0:68
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1400-0x14ff mem
0xe0040000-0xe0
0400ff irq 12 at device 11.0 on pci0
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: Ethernet address: 00:0d:b9:13:b0:69
isab0: <PCI-ISA bridge> port
0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x
9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff0
0-0xff0f at device 15.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xefffe000-0xefffefff irq 15 at
devic
e 15.4 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0: <AMD CS5536 USB 2.0 controller> mem 0xefffd000-0xefffdfff irq 15 at
devic
e 15.5 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <AMD CS5536 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: AMD EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff on isa0
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
RTC BIOS diagnostic error 80<clock_battery>
Timecounter "TSC" frequency 498052809 Hz quality 800
Timecounters tick every 10.000 msec
Fast IPsec: Initialized Security Association Processing.
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufr s:/dev/ad0s1a
Trying to mount root from ufs:/dev/ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/da0saa 2a 1a
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufe s:ad0s1a
Trying to mount root from ufs:ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:da0s1a
Trying to mount root from ufs:da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
END LOG 1
---
Start log 2:
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ ³
³ ³ ______
³ ³ | ____| __ ___ ___
³ Welcome to FreeBSD! ³ | |__ | '__/ _ \/ _ \
³ ³ | __|| | | __/ __/
³ ³ | | | | | | |
³ 1. Boot FreeBSD [default] ³ |_| |_| \___|\___|
³ 2. Boot FreeBSD with ACPI enabled ³ ____ _____ _____
³ 3. Boot FreeBSD in Safe Mode ³ | _ \ / ____| __ \
³ 4. Boot FreeBSD in single user mode ³ | |_) | (___ | | | |
³ 5. Boot FreeBSD with verbose logging ³ | _ < \___ \| | | |
³ 6. Escape to loader prompt ³ | |_) |____) | |__| |
³ 7. Reboot ³ | | | |
³ ³ |____/|_____/|_____/
³ ³
³ ³
³ ³
³ Select option, [Enter] for default ³
³ or [Space] to pause timer 0 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p11 #0: Sun Feb 24 16:38:29 EST 2008
[EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense_wrap.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x5a2 Stepping = 2
Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
AMD Features=0xc0400000<MMX+,3DNow+,3DNow>
real memory = 268435456 (256 MB)
avail memory = 253272064 (241 MB)
pnpbios: Bad PnP BIOS data checksum
wlan: mac acl policy registered
K6-family MTRR support enabled (2 registers)
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
MFGPT bar: f00100006200
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver
attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem
0xe0000000-0xe0
0000ff irq 10 at device 9.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0d:b9:13:b0:68
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1400-0x14ff mem
0xe0040000-0xe0
0400ff irq 12 at device 11.0 on pci0
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: Ethernet address: 00:0d:b9:13:b0:69
isab0: <PCI-ISA bridge> port
0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x
9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff0
0-0xff0f at device 15.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xefffe000-0xefffefff irq 15 at
devic
e 15.4 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0: <AMD CS5536 USB 2.0 controller> mem 0xefffd000-0xefffdfff irq 15 at
devic
e 15.5 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <AMD CS5536 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: AMD EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff on isa0
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
RTC BIOS diagnostic error 80<clock_battery>
Timecounter "TSC" frequency 498052607 Hz quality 800
Timecounters tick every 10.000 msec
Fast IPsec: Initialized Security Association Processing.
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/ad0s1a
Trying to mount root from ufs:/dev/ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/da0s1a
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:ad0s1a
Trying to mount root from ufs:ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:da0s1a
Trying to mount root from ufs:da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
END LOG 2
---
-----Original Message-----
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 26, 2008 10:08 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] problem installing full version on alix board
w/ 5gb microdrive
Can you post the error at step 10? Or the entire serial boot log so
we can see where you are getting stuck? Thanks
--Bill
On Wed, Nov 26, 2008 at 8:26 AM, Patrick M. Murray, M.F.A.
<[EMAIL PROTECTED]> wrote:
> Hi, I followed these instructions (pasted below), and I cannot get the
file
> system to mount. What am I doing wrong? It lists no GEOM file systems when
I
> push the '?'. But I sat here and watched it install, it loads up via
serial
> interface, but step #10 is where I am having the problem. What do I do?
> Thanks
>
>
>
> Ps. Using 1.21RC2 iso
>
>
>
> -patrick
>
>
>
> Steps
>
> In VirtualBox, create a new virtual machine with USB redirection, no need
to
> set up virtual hardrive, use pfSense
>
> iso for CD-ROM mapping and add another network interface,
>
> 1.
>
> 2. Start VirtualBox, pfSense is booting, configure network interfaces,
menu
> should then appear.
>
> 3. Plug your USB CF adapter with Microdrive inside.
>
> 4. At menu prompt, type option 99 to install.
>
> 5. Proceed with the defaults, choose embedded kernel install. Check Grub
for
> boot method.
>
> 6. Stop the virtual machine.
>
> 7. Eject microdrive, let's now proceed with Wrap.
>
> 8. Boot your WRAP with microdrive inside, serial cable connected.
>
> 9. Connect the serial console, pfSense should be booting but can't mount
> root filesystem.
>
> 10. When asked, type ufs:/dev/ad0s1a, pfSense boot should mount the root
> filesystem and complete.
>
> 11. Set up your network interfaces
>
> 12. On console menu, type option 8.
>
> 13. Edit /etc/fstab. Replace /dev/da0s1a to /dev/ad0s1a. Save.
>
> 14. Reboot
>
> 15. Enjoy!
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
> Commercial support available - https://portal.pfsense.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Commercial support available - https://portal.pfsense.org
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Commercial support available - https://portal.pfsense.org
