52244736261120 KB Extended Memory
Waiting for HDD ...
01F0 Master 848A ST650211CF
Phys C/H/S 9690/16/63 Log C/H/S 608/255/63 LBA
-\|/-\|//bboooott..ccoonnffiigg::
--DD//--\\||//--\\||//--\\||//--\
\||//--
\\||//--\\||//--\\||//--\\||//--\
\||//
--\\||//--\\||//--\\||//--\\||//--\
\||
//--\\Consoles: internal video/keyboard serial port
BIOS drive C: is disk0
BIOS 640kB/261120kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
([EMAIL PROTECTED], Sun Feb 24 16:20:44 EST 2008)
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/
-\|/-\|/-\|/-\|/-\|/-\Loading
/boot/defaults/loader.conf
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/
-\|/-\|/-\|/-\|/boot/kernel/kernel text=0x4b9580
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|
/data=0x90ab4+0x42638
-\|/-\|/-\|/-syms=[0x4+0x5ab50\|/-\|/-\+0x4+0x7
21b4|/-\|/-]
\|/-\|/-\|/-\|/-\|/-\ ______ | ____| __
___
___ | |__ | '__/ _ \/ _ \ | __|| | | __/ __/ | | | |
| |
| |_| |_| \___|\___| ____ _____ _____ | _ \ / ____|
__ \
| |_) | (___ | | | | | _ < \___ \| | | | | |_) |____) | |
__| | |
| | |
|____/|_____/|_____/
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³³³³³³³³³³³³³³³³³³³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ÄÄ
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÚÀ
¿ÙWelcome
to FreeBSD!1 . Boot FreeBSD [default]2 . Boot FreeBSD with ACPI
enabled3 .
Boot FreeBSD in Safe Mode4 . Boot FreeBSD in single user mode5 . Boot
FreeBSD with verbose logging6 . Escape to loader prompt7 .
RebootSelect
option, [Enter] for defaultor [Space] to pause timer 1 1 1 1 1 1
1 1 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |/-\|/-Copyright (c) 1992-2007
The
FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p11 #0: Sun Feb 24 16:38:29 EST 2008
[EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/
pfSense_wrap.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class
CPU)
Origin = "AuthenticAMD" Id = 0x5a2 Stepping = 2
Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
AMD Features=0xc0400000<MMX+,3DNow+,3DNow>
real memory = 268435456 (256 MB)
avail memory = 253272064 (241 MB)
pnpbios: Bad PnP BIOS data checksum
wlan: mac acl policy registered
K6-family MTRR support enabled (2 registers)
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
MFGPT bar: f00100006200
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver
attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem
0xe0000000-0xe0
0000ff irq 10 at device 9.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0d:b9:13:b0:68
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1400-0x14ff mem
0xe0040000-0xe0
0400ff irq 12 at device 11.0 on pci0
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: Ethernet address: 00:0d:b9:13:b0:69
isab0: <PCI-ISA bridge> port
0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x
9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff0
0-0xff0f at device 15.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xefffe000-0xefffefff irq
15 at
devic
e 15.4 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0: <AMD CS5536 USB 2.0 controller> mem 0xefffd000-0xefffdfff irq
15 at
devic
e 15.5 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <AMD CS5536 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: AMD EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff on isa0
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
RTC BIOS diagnostic error 80<clock_battery>
Timecounter "TSC" frequency 498052809 Hz quality 800
Timecounters tick every 10.000 msec
Fast IPsec: Initialized Security Association Processing.
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufr s:/dev/ad0s1a
Trying to mount root from ufs:/dev/ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/da0saa 2a 1a
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufe s:ad0s1a
Trying to mount root from ufs:ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:da0s1a
Trying to mount root from ufs:da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
END LOG 1
---
Start log 2:
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
¿
³ ³
³ ³ ______
³ ³ | ____| __ ___ ___
³ Welcome to FreeBSD! ³ | |__ | '__/ _ \/ _
\
³ ³ | __|| | | __/ _
_/
³ ³ | | | | | |
|
³ 1. Boot FreeBSD [default] ³ |_| |_| \___|\__
_|
³ 2. Boot FreeBSD with ACPI enabled ³ ____ _____ _____
³ 3. Boot FreeBSD in Safe Mode ³ | _ \ / ____| __ \
³ 4. Boot FreeBSD in single user mode ³ | |_) | (___ | | |
|
³ 5. Boot FreeBSD with verbose logging ³ | _ < \___ \| | |
|
³ 6. Escape to loader prompt ³ | |_) |____) | |__|
|
³ 7. Reboot ³ | | |
|
³ ³ |____/|_____/|_____/
³ ³
³ ³
³ ³
³ Select option, [Enter] for default ³
³ or [Space] to pause timer 0 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Ù
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p11 #0: Sun Feb 24 16:38:29 EST 2008
[EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/
pfSense_wrap.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class
CPU)
Origin = "AuthenticAMD" Id = 0x5a2 Stepping = 2
Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
AMD Features=0xc0400000<MMX+,3DNow+,3DNow>
real memory = 268435456 (256 MB)
avail memory = 253272064 (241 MB)
pnpbios: Bad PnP BIOS data checksum
wlan: mac acl policy registered
K6-family MTRR support enabled (2 registers)
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
MFGPT bar: f00100006200
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver
attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem
0xe0000000-0xe0
0000ff irq 10 at device 9.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0d:b9:13:b0:68
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1400-0x14ff mem
0xe0040000-0xe0
0400ff irq 12 at device 11.0 on pci0
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: Ethernet address: 00:0d:b9:13:b0:69
isab0: <PCI-ISA bridge> port
0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x
9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff0
0-0xff0f at device 15.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xefffe000-0xefffefff irq
15 at
devic
e 15.4 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0: <AMD CS5536 USB 2.0 controller> mem 0xefffd000-0xefffdfff irq
15 at
devic
e 15.5 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <AMD CS5536 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: AMD EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff on isa0
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
RTC BIOS diagnostic error 80<clock_battery>
Timecounter "TSC" frequency 498052607 Hz quality 800
Timecounters tick every 10.000 msec
Fast IPsec: Initialized Security Association Processing.
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/ad0s1a
Trying to mount root from ufs:/dev/ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/da0s1a
Trying to mount root from ufs:/dev/da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:ad0s1a
Trying to mount root from ufs:ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:da0s1a
Trying to mount root from ufs:da0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
END LOG 2
---
-----Original Message-----
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 26, 2008 10:08 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] problem installing full version on
alix board
w/ 5gb microdrive
Can you post the error at step 10? Or the entire serial boot log so
we can see where you are getting stuck? Thanks
--Bill
On Wed, Nov 26, 2008 at 8:26 AM, Patrick M. Murray, M.F.A.
<[EMAIL PROTECTED]> wrote:
Hi, I followed these instructions (pasted below), and I cannot get
the
file
system to mount. What am I doing wrong? It lists no GEOM file
systems when
I
push the '?'. But I sat here and watched it install, it loads up via
serial
interface, but step #10 is where I am having the problem. What do
I do?
Thanks
Ps. Using 1.21RC2 iso
-patrick
Steps
In VirtualBox, create a new virtual machine with USB redirection,
no need
to
set up virtual hardrive, use pfSense
iso for CD-ROM mapping and add another network interface,
1.
2. Start VirtualBox, pfSense is booting, configure network
interfaces,
menu
should then appear.
3. Plug your USB CF adapter with Microdrive inside.
4. At menu prompt, type option 99 to install.
5. Proceed with the defaults, choose embedded kernel install. Check
Grub
for
boot method.
6. Stop the virtual machine.
7. Eject microdrive, let's now proceed with Wrap.
8. Boot your WRAP with microdrive inside, serial cable connected.
9. Connect the serial console, pfSense should be booting but can't
mount
root filesystem.
10. When asked, type ufs:/dev/ad0s1a, pfSense boot should mount the
root
filesystem and complete.
11. Set up your network interfaces
12. On console menu, type option 8.
13. Edit /etc/fstab. Replace /dev/da0s1a to /dev/ad0s1a. Save.
14. Reboot
15. Enjoy!
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Commercial support available - https://portal.pfsense.org
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Commercial support available - https://portal.pfsense.org
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Commercial support available - https://portal.pfsense.org