I've just acquired an X500 unit and after throwing boatloads of traffic through 
it, I haven't seen a single watchdog timeout. Two ports are connected to a 
switch and a third port to a workstation. I can send you any information on my 
config if you'd like for testing/comparison.

Tim Nelson
Systems/Network Support
Rockbochs Inc.
(218)727-4332 x105

> -----Original Message-----
> From: Andrew Cotter [mailto:andrew.cot...@somersetcapital.com] 
> Sent: Friday, March 20, 2009 12:35 PM
> To: support@pfsense.com
> Subject: RE: [pfSense Support] AW: Firebox X series w/ 1.2 and 1.2.2
> issue
> 
> >Von: Dimitri Rodis [mailto:dimit...@integritasystems.com] 
> >Gesendet: Freitag, 20. März 2009 18:27
> >An: support@pfsense.com
> >Betreff: [pfSense Support] Firebox X series w/ 1.2 and 1.2.2 issue
> >
> >
> >     So, I have a pair of firebox x700 units that I have put new CF
> cards
> in. I have tried both 1.2-RELEASE and 1.2.2 (both embedded), >and
> both
> behave the same way.
> >      
> >     On the serial console, I will see the following:
> >     re4: watchdog timeout
> >     re4: watchdog timeout
> >     ....etc
> >      
> >     If I change the LAN interface to re1, the same thing happens,
> except
> on the serial console I will see:
> >     re1: watchdog timeout
> >     re1: watchdog timeout
> >     ...etc
> 
> 
> --------------------------------
> 
> I had a similar issue while I was working on a few X500/700 whatever
> boxes
> last week.  I know people suggest that various low end switches
> produce this
> error, but I had no switch in the mix.
> 
> I was going direct to a desktop and was getting it.  It was a home
> made
> looking cable.  As soon as I plugged in one of our prefab cables it
> went
> away.   Try and switch out the ethernet cable. 
> 
> Let us know.   I have 5 of these boxes in the corner of my office. 3
> of
> which I am planning on deploying in the next two weeks.
> 
> Andrew

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com

Commercial support available - https://portal.pfsense.org

Reply via email to