Just like I answered previously, without the pfSense Alteon was able to
handle the load without problems.
Cisco switch also didn't have any errors on the interface. Plus, I only
started to see errors, when the high load began and at that same time I
also saw some packet loss on the firewall.
Jaime Díaz wrote:
On Wed, Jul 29, 2009 at 12:30 PM, Lenny<five2one.le...@gmail.com> wrote:
By the way, I checked sysctl net.inet.ip.intr_queue_drops and it's "0".
On the interfaces I see that em0(outside) has 0 errors, but on the
em1(inside) there are 3666587/0.
6 of the CPUs(cores) are usually 100% idle, while the other 2 are actually
stuck with emX taskq.
In other words - nothing's changed. Except for 1 thing - the management
spent the money and now they wanna see results.
Why so many error on em1? Have you checked the settings on your
switches? have you tried another port or, better, a different switch?
---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com
Commercial support available - https://portal.pfsense.org
