On 12/15/2009 6:31 AM, Rainer Duffner wrote:
> Ugo Bellavance schrieb:
>> I like this answer, and there are really 2 facts that are highlighted
>> here:
>>
>> - Users will always complain
>> - The better your product and product history, the less users will
>> read the warnings.  PfSense has always had a good record to me, so I
>> don't read the upgrade document at each upgrade.
>>
>> I'll wait for the image, Chris, and I don't mind the few weeks of
>> wait, but I think that maybe uploading a (or a set of) README files on
>> the mirror would help... I would personnally be very tempted to read a
>> README file while it is downloading, especially if it has "WRAP" in
>> its name.
>>

That might help, but it is mentioned in the Upgrade Guide, and a couple
places on the Doc Wiki. I thought it was mentioned in the release
announcement, but I may have been thinking about one of the -RC version
announcements.

> I upgraded my ALIX yesterday to 1.2.3-RELEASE and found out I need the
> BIOS-update (I switched from 128M embedded to 4GB version, too). Turns
> out that the image for the BIOS-update provided on the pfSense.org page
> doesn't work (maybe it's for a different ALIX, I have an ALIX2-series
> board).
> Of course, I only found out about this after I had wiped my working
> pfSense installation with the BIOS-update image (and no old image
> available, and no internet-access anymore).
> 
> Luckily, I was able to tether my iMac with my on-call iPhone (the
> personal iPhone doesn't have 3G reception at home....) and download the
> required files from the pcengines website and finally run 1.2.3 - after
> a couple of wasted hours.
> 
> So much for "a ready-made image makes it easier for everybody"....

Which model ALIX do you have? It says on the page that there are some
excluded models, usually it's the ones with VGA that require a different
BIOS. Did the image not boot at all? Or what did it do?

Jim


---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com

Commercial support available - https://portal.pfsense.org

Reply via email to