Erichs config looks good!
That's why I said
> what BRI interface config you use...
I don't like shooting in the dark...
Christian
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Erich Hohermuth
Sent: Donnerstag, 3. M�rz 2005 15:02
To: [email protected]
Subject: Re: [swinog] ISDN Layer 2 Problem
Hello
I use the following config with the 836er Cisco Routers.
> I think it's more an generic problem then a product specific
> one... but:
interface BRI0
no ip address
encapsulation ppp
no ip route-cache
no ip mroute-cache
load-interval 30
dialer pool-member 6
isdn switch-type basic-net3
isdn tei-negotiation first-call
no cdp enable
ppp multilink
Regards
Erich
--
* Erich Hohermuth IP Engineer - SolNet (AS 9044) PGPKEY-46A08FCB *
* phone: +41 32 686 82 22 / sip:[EMAIL PROTECTED] *
_______________________________________________
swinog mailing list
[email protected]
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
_______________________________________________ swinog mailing list [email protected] http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
