> Thanks all for your inputs. > > We're rather looking for some kind of "blackbox" where you just have to > plug the sensors, and you can poll the datas over snmp. > > We don't really have time for the DIY stuff :) > > I think I'll go with the AKCP solution, seems to be the best solution > with the widest range of sensors, which are extensible up to 300m.
Looks like a good solution. > > @Kirill > > With AKCP products, you have an AC sensor wich monitor the AC voltage. > Our idea is to check if a power line fails. We already have alarms if > our PSU fails, but you can't tell if it's a PSU failure, or the whole > power line which is down. Not entirely what I was looking for, most UPSes support readout of the line state nowdays, so detecting power failure is easy, what we where looking for is a "Energy Counter" at the feed into data center, so we could read out our consumption in kW/h automatically. Cheers _______________________________________________ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog