Lukas Gebauer wrote: > No, here are no reason for this. I am using Synaser with USB emulated > serials, I am using it for RS-895 too. >
I thought it should be OK, it's nothing particularly unusual. > What exactly is failing? Connect method or Config method? > I can't remember now, because I rebooted the PC and it now works. All I can say is that I was trying to connect to the port, configure it, then send some data, and portmon showed no evidence that I'd attempted to connect. I tried to change the device to COM2 in device manager, but something obviously wasn't right because portmon still showed COM5 (and no COM2), so this morning I rebooted and it shows COM2 which works (well portmon shows a connection being made). So I changed back to COM5, and without a reboot portmon shows the correct port and my software without any changes connects to it. Maybe something not properly installed at a driver level. Note: This project will need 5 serial ports so setting a "normal" port number was not a real option. -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0845 45 89 555 Registered in England (0456 0902) at 13 Clarke Rd, Milton Keynes, MK1 1LG ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ synalist-public mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/synalist-public
